Grafana Loki configuration parameters

# A comma-separated list of components to run. The default value 'all' runs Loki
# in single binary mode. The value 'read' is an alias to run only read-path
# related components such as the querier and query-frontend, but all in the same
# process. The value 'write' is an alias to run only write-path related
# components such as the distributor and compactor, but all in the same process.
# Supported values: all, compactor, distributor, ingester, querier,
# query-scheduler, ingester-querier, query-frontend, index-gateway, ruler,
# table-manager, read, write. A full list of available targets can be printed
# when running Loki with the '-list-targets' command line flag.
# CLI flag: -target
[target: <string> | default = "all"]

# Enables authentication through the X-Scope-OrgID header, which must be present
# if true. If false, the OrgID will always be set to 'fake'.
# CLI flag: -auth.enabled
[auth_enabled: <boolean> | default = true]

# The amount of virtual memory in bytes to reserve as ballast in order to
# optimize garbage collection. Larger ballasts result in fewer garbage
# collection passes, reducing CPU overhead at the cost of heap size. The ballast
# will not consume physical memory, because it is never read from. It will,
# however, distort metrics, because it is counted as live memory.
# CLI flag: -config.ballast-bytes
[ballast_bytes: <int> | default = 0]

# Configures the server of the launched module(s).
[server: <server>]

# Configures the distributor.
[distributor: <distributor>]

# Configures the querier. Only appropriate when running all modules or just the
# querier.
[querier: <querier>]

# The query_scheduler block configures the Loki query scheduler. When configured
# it separates the tenant query queues from the query-frontend.
[query_scheduler: <query_scheduler>]

# The frontend block configures the Loki query-frontend.
[frontend: <frontend>]

# The query_range block configures the query splitting and caching in the Loki
# query-frontend.
[query_range: <query_range>]

# The ruler block configures the Loki ruler.
[ruler: <ruler>]

# The ingester_client block configures how the distributor will connect to
# ingesters. Only appropriate when running all components, the distributor, or
# the querier.
[ingester_client: <ingester_client>]

# The ingester block configures the ingester and how the ingester will register
# itself to a key value store.
[ingester: <ingester>]

# The index_gateway block configures the Loki index gateway server, responsible
# for serving index queries without the need to constantly interact with the
# object store.
[index_gateway: <index_gateway>]

# The storage_config block configures one of many possible stores for both the
# index and chunks. Which configuration to be picked should be defined in
# schema_config block.
[storage_config: <storage_config>]

# The chunk_store_config block configures how chunks will be cached and how long
# to wait before saving them to the backing store.
[chunk_store_config: <chunk_store_config>]

# Configures the chunk index schema and where it is stored.
[schema_config: <schema_config>]

# The compactor block configures the compactor component, which compacts index
# shards for performance.
[compactor: <compactor>]

# The limits_config block configures global and per-tenant limits in Loki.
[limits_config: <limits_config>]

# The frontend_worker configures the worker - running within the Loki querier -
# picking up and executing queries enqueued by the query-frontend.
[frontend_worker: <frontend_worker>]

# The table_manager block configures the table manager for retention.
[table_manager: <table_manager>]

# Configuration for memberlist client. Only applies if the selected kvstore is
# memberlist.
# 
# When a memberlist config with atleast 1 join_members is defined, kvstore of
# type memberlist is automatically selected for all the components that require
# a ring unless otherwise specified in the component's configuration section.
[memberlist: <memberlist>]

# Configuration for 'runtime config' module, responsible for reloading runtime
# configuration file.
[runtime_config: <runtime_config>]

# Configuration for tracing.
[tracing: <tracing>]

# Configuration for usage report.
[analytics: <analytics>]

# Common configuration to be shared between multiple modules. If a more specific
# configuration is given in other sections, the related configuration within
# this section will be ignored.
[common: <common>]

# How long to wait between SIGTERM and shutdown. After receiving SIGTERM, Loki
# will report 503 Service Unavailable status via /ready endpoint.
# CLI flag: -shutdown-delay
[shutdown_delay: <duration> | default = 0s]

# HTTP server listen network, default tcp
# CLI flag: -server.http-listen-network
[http_listen_network: <string> | default = "tcp"]

# HTTP server listen address.
# CLI flag: -server.http-listen-address
[http_listen_address: <string> | default = ""]

# HTTP server listen port.
# CLI flag: -server.http-listen-port
[http_listen_port: <int> | default = 3100]

# Maximum number of simultaneous http connections, <=0 to disable
# CLI flag: -server.http-conn-limit
[http_listen_conn_limit: <int> | default = 0]

# gRPC server listen network
# CLI flag: -server.grpc-listen-network
[grpc_listen_network: <string> | default = "tcp"]

# gRPC server listen address.
# CLI flag: -server.grpc-listen-address
[grpc_listen_address: <string> | default = ""]

# gRPC server listen port.
# CLI flag: -server.grpc-listen-port
[grpc_listen_port: <int> | default = 9095]

# Maximum number of simultaneous grpc connections, <=0 to disable
# CLI flag: -server.grpc-conn-limit
[grpc_listen_conn_limit: <int> | default = 0]

# Comma-separated list of cipher suites to use. If blank, the default Go cipher
# suites is used.
# CLI flag: -server.tls-cipher-suites
[tls_cipher_suites: <string> | default = ""]

# Minimum TLS version to use. Allowed values: VersionTLS10, VersionTLS11,
# VersionTLS12, VersionTLS13. If blank, the Go TLS minimum version is used.
# CLI flag: -server.tls-min-version
[tls_min_version: <string> | default = ""]

http_tls_config:
  # HTTP server cert path.
  # CLI flag: -server.http-tls-cert-path
  [cert_file: <string> | default = ""]

  # HTTP server key path.
  # CLI flag: -server.http-tls-key-path
  [key_file: <string> | default = ""]

  # HTTP TLS Client Auth type.
  # CLI flag: -server.http-tls-client-auth
  [client_auth_type: <string> | default = ""]

  # HTTP TLS Client CA path.
  # CLI flag: -server.http-tls-ca-path
  [client_ca_file: <string> | default = ""]

grpc_tls_config:
  # GRPC TLS server cert path.
  # CLI flag: -server.grpc-tls-cert-path
  [cert_file: <string> | default = ""]

  # GRPC TLS server key path.
  # CLI flag: -server.grpc-tls-key-path
  [key_file: <string> | default = ""]

  # GRPC TLS Client Auth type.
  # CLI flag: -server.grpc-tls-client-auth
  [client_auth_type: <string> | default = ""]

  # GRPC TLS Client CA path.
  # CLI flag: -server.grpc-tls-ca-path
  [client_ca_file: <string> | default = ""]

# Register the intrumentation handlers (/metrics etc).
# CLI flag: -server.register-instrumentation
[register_instrumentation: <boolean> | default = true]

# Timeout for graceful shutdowns
# CLI flag: -server.graceful-shutdown-timeout
[graceful_shutdown_timeout: <duration> | default = 30s]

# Read timeout for HTTP server
# CLI flag: -server.http-read-timeout
[http_server_read_timeout: <duration> | default = 30s]

# Write timeout for HTTP server
# CLI flag: -server.http-write-timeout
[http_server_write_timeout: <duration> | default = 30s]

# Idle timeout for HTTP server
# CLI flag: -server.http-idle-timeout
[http_server_idle_timeout: <duration> | default = 2m]

# Limit on the size of a gRPC message this server can receive (bytes).
# CLI flag: -server.grpc-max-recv-msg-size-bytes
[grpc_server_max_recv_msg_size: <int> | default = 4194304]

# Limit on the size of a gRPC message this server can send (bytes).
# CLI flag: -server.grpc-max-send-msg-size-bytes
[grpc_server_max_send_msg_size: <int> | default = 4194304]

# Limit on the number of concurrent streams for gRPC calls (0 = unlimited)
# CLI flag: -server.grpc-max-concurrent-streams
[grpc_server_max_concurrent_streams: <int> | default = 100]

# The duration after which an idle connection should be closed. Default:
# infinity
# CLI flag: -server.grpc.keepalive.max-connection-idle
[grpc_server_max_connection_idle: <duration> | default = 2562047h47m16.854775807s]

# The duration for the maximum amount of time a connection may exist before it
# will be closed. Default: infinity
# CLI flag: -server.grpc.keepalive.max-connection-age
[grpc_server_max_connection_age: <duration> | default = 2562047h47m16.854775807s]

# An additive period after max-connection-age after which the connection will be
# forcibly closed. Default: infinity
# CLI flag: -server.grpc.keepalive.max-connection-age-grace
[grpc_server_max_connection_age_grace: <duration> | default = 2562047h47m16.854775807s]

# Duration after which a keepalive probe is sent in case of no activity over the
# connection., Default: 2h
# CLI flag: -server.grpc.keepalive.time
[grpc_server_keepalive_time: <duration> | default = 2h]

# After having pinged for keepalive check, the duration after which an idle
# connection should be closed, Default: 20s
# CLI flag: -server.grpc.keepalive.timeout
[grpc_server_keepalive_timeout: <duration> | default = 20s]

# Minimum amount of time a client should wait before sending a keepalive ping.
# If client sends keepalive ping more often, server will send GOAWAY and close
# the connection.
# CLI flag: -server.grpc.keepalive.min-time-between-pings
[grpc_server_min_time_between_pings: <duration> | default = 10s]

# If true, server allows keepalive pings even when there are no active
# streams(RPCs). If false, and client sends ping when there are no active
# streams, server will send GOAWAY and close the connection.
# CLI flag: -server.grpc.keepalive.ping-without-stream-allowed
[grpc_server_ping_without_stream_allowed: <boolean> | default = true]

# Output log messages in the given format. Valid formats: [logfmt, json]
# CLI flag: -log.format
[log_format: <string> | default = "logfmt"]

# Only log messages with the given severity or above. Valid levels: [debug,
# info, warn, error]
# CLI flag: -log.level
[log_level: <string> | default = "info"]

# Optionally log the source IPs.
# CLI flag: -server.log-source-ips-enabled
[log_source_ips_enabled: <boolean> | default = false]

# Header field storing the source IPs. Only used if
# server.log-source-ips-enabled is true. If not set the default Forwarded,
# X-Real-IP and X-Forwarded-For headers are used
# CLI flag: -server.log-source-ips-header
[log_source_ips_header: <string> | default = ""]

# Regex for matching the source IPs. Only used if server.log-source-ips-enabled
# is true. If not set the default Forwarded, X-Real-IP and X-Forwarded-For
# headers are used
# CLI flag: -server.log-source-ips-regex
[log_source_ips_regex: <string> | default = ""]

[log_request_headers: <boolean>]

# Optionally log requests at info level instead of debug level.
# CLI flag: -server.log-request-at-info-level-enabled
[log_request_at_info_level_enabled: <boolean> | default = false]

[log_request_exclude_headers_list: <string> | default = ""]

# Base path to serve all API routes from (e.g. /v1/)
# CLI flag: -server.path-prefix
[http_path_prefix: <string> | default = ""]

ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -distributor.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -distributor.ring.prefix
    [prefix: <string> | default = "collectors/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is: distributor.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is: distributor.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -distributor.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -distributor.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -distributor.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -distributor.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Period at which to heartbeat to the ring. 0 = disabled.
  # CLI flag: -distributor.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 5s]

  # The heartbeat timeout after which distributors are considered unhealthy
  # within the ring. 0 = never (timeout disabled).
  # CLI flag: -distributor.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # Name of network interface to read address from.
  # CLI flag: -distributor.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

rate_store:
  # The max number of concurrent requests to make to ingester stream apis
  # CLI flag: -distributor.rate-store.max-request-parallelism
  [max_request_parallelism: <int> | default = 200]

  # The interval on which distributors will update current stream rates from
  # ingesters
  # CLI flag: -distributor.rate-store.stream-rate-update-interval
  [stream_rate_update_interval: <duration> | default = 1s]

  # Timeout for communication between distributors and any given ingester when
  # updating rates
  # CLI flag: -distributor.rate-store.ingester-request-timeout
  [ingester_request_timeout: <duration> | default = 500ms]

# Maximum duration for which the live tailing requests are served.
# CLI flag: -querier.tail-max-duration
[tail_max_duration: <duration> | default = 1h]

# Time to wait before sending more than the minimum successful query requests.
# CLI flag: -querier.extra-query-delay
[extra_query_delay: <duration> | default = 0s]

# Maximum lookback beyond which queries are not sent to ingester. 0 means all
# queries are sent to ingester.
# CLI flag: -querier.query-ingesters-within
[query_ingesters_within: <duration> | default = 3h]

engine:
  # Deprecated: Use querier.query-timeout instead. Timeout for query execution.
  # CLI flag: -querier.engine.timeout
  [timeout: <duration> | default = 5m]

  # The maximum amount of time to look back for log lines. Used only for instant
  # log queries.
  # CLI flag: -querier.engine.max-lookback-period
  [max_look_back_period: <duration> | default = 30s]

# The maximum number of concurrent queries allowed.
# CLI flag: -querier.max-concurrent
[max_concurrent: <int> | default = 10]

# Only query the store, and not attempt any ingesters. This is useful for
# running a standalone querier pool operating only against stored data.
# CLI flag: -querier.query-store-only
[query_store_only: <boolean> | default = false]

# When true, queriers only query the ingesters, and not stored data. This is
# useful when the object store is unavailable.
# CLI flag: -querier.query-ingester-only
[query_ingester_only: <boolean> | default = false]

# When true, allow queries to span multiple tenants.
# CLI flag: -querier.multi-tenant-queries-enabled
[multi_tenant_queries_enabled: <boolean> | default = false]

# When true, querier limits sent via a header are enforced.
# CLI flag: -querier.per-request-limits-enabled
[per_request_limits_enabled: <boolean> | default = false]

# Maximum number of outstanding requests per tenant per query-scheduler.
# In-flight requests above this limit will fail with HTTP response status code
# 429.
# CLI flag: -query-scheduler.max-outstanding-requests-per-tenant
[max_outstanding_requests_per_tenant: <int> | default = 100]

# If a querier disconnects without sending notification about graceful shutdown,
# the query-scheduler will keep the querier in the tenant's shard until the
# forget delay has passed. This feature is useful to reduce the blast radius
# when shuffle-sharding is enabled.
# CLI flag: -query-scheduler.querier-forget-delay
[querier_forget_delay: <duration> | default = 0s]

# This configures the gRPC client used to report errors back to the
# query-frontend.
# The CLI flags prefix for this block configuration is:
# query-scheduler.grpc-client-config
[grpc_client_config: <grpc_client>]

# Set to true to have the query schedulers create and place themselves in a
# ring. If no frontend_address or scheduler_address are present anywhere else in
# the configuration, Loki will toggle this value to true.
# CLI flag: -query-scheduler.use-scheduler-ring
[use_scheduler_ring: <boolean> | default = false]

# The hash ring configuration. This option is required only if
# use_scheduler_ring is true.
scheduler_ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -query-scheduler.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -query-scheduler.ring.prefix
    [prefix: <string> | default = "collectors/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is: query-scheduler.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is: query-scheduler.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -query-scheduler.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -query-scheduler.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -query-scheduler.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -query-scheduler.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Period at which to heartbeat to the ring. 0 = disabled.
  # CLI flag: -query-scheduler.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 15s]

  # The heartbeat timeout after which compactors are considered unhealthy within
  # the ring. 0 = never (timeout disabled).
  # CLI flag: -query-scheduler.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # File path where tokens are stored. If empty, tokens are not stored at
  # shutdown and restored at startup.
  # CLI flag: -query-scheduler.ring.tokens-file-path
  [tokens_file_path: <string> | default = ""]

  # True to enable zone-awareness and replicate blocks across different
  # availability zones.
  # CLI flag: -query-scheduler.ring.zone-awareness-enabled
  [zone_awareness_enabled: <boolean> | default = false]

  # Instance ID to register in the ring.
  # CLI flag: -query-scheduler.ring.instance-id
  [instance_id: <string> | default = "<hostname>"]

  # Name of network interface to read address from.
  # CLI flag: -query-scheduler.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

  # Port to advertise in the ring (defaults to server.grpc-listen-port).
  # CLI flag: -query-scheduler.ring.instance-port
  [instance_port: <int> | default = 0]

  # IP address to advertise in the ring.
  # CLI flag: -query-scheduler.ring.instance-addr
  [instance_addr: <string> | default = ""]

  # The availability zone where this instance is running. Required if
  # zone-awareness is enabled.
  # CLI flag: -query-scheduler.ring.instance-availability-zone
  [instance_availability_zone: <string> | default = ""]

# Log queries that are slower than the specified duration. Set to 0 to disable.
# Set to < 0 to enable on all queries.
# CLI flag: -frontend.log-queries-longer-than
[log_queries_longer_than: <duration> | default = 0s]

# Max body size for downstream prometheus.
# CLI flag: -frontend.max-body-size
[max_body_size: <int> | default = 10485760]

# True to enable query statistics tracking. When enabled, a message with some
# statistics is logged for every query.
# CLI flag: -frontend.query-stats-enabled
[query_stats_enabled: <boolean> | default = false]

# Maximum number of outstanding requests per tenant per frontend; requests
# beyond this error with HTTP 429.
# CLI flag: -querier.max-outstanding-requests-per-tenant
[max_outstanding_per_tenant: <int> | default = 2048]

# In the event a tenant is repeatedly sending queries that lead the querier to
# crash or be killed due to an out-of-memory error, the crashed querier will be
# disconnected from the query frontend and a new querier will be immediately
# assigned to the tenant’s shard. This invalidates the assumption that shuffle
# sharding can be used to reduce the impact on tenants. This option mitigates
# the impact by configuring a delay between when a querier disconnects because
# of a crash and when the crashed querier is actually removed from the tenant's
# shard.
# CLI flag: -query-frontend.querier-forget-delay
[querier_forget_delay: <duration> | default = 0s]

# DNS hostname used for finding query-schedulers.
# CLI flag: -frontend.scheduler-address
[scheduler_address: <string> | default = ""]

# How often to resolve the scheduler-address, in order to look for new
# query-scheduler instances. Also used to determine how often to poll the
# scheduler-ring for addresses if the scheduler-ring is configured.
# CLI flag: -frontend.scheduler-dns-lookup-period
[scheduler_dns_lookup_period: <duration> | default = 10s]

# Number of concurrent workers forwarding queries to single query-scheduler.
# CLI flag: -frontend.scheduler-worker-concurrency
[scheduler_worker_concurrency: <int> | default = 5]

# The grpc_client block configures the gRPC client used to communicate between
# two Loki components.
# The CLI flags prefix for this block configuration is:
# frontend.grpc-client-config
[grpc_client_config: <grpc_client>]

# Time to wait for inflight requests to finish before forcefully shutting down.
# This needs to be aligned with the query timeout and the graceful termination
# period of the process orchestrator.
# CLI flag: -frontend.graceful-shutdown-timeout
[graceful_shutdown_timeout: <duration> | default = 5m]

# Name of network interface to read address from. This address is sent to
# query-scheduler and querier, which uses it to send the query response back to
# query-frontend.
# CLI flag: -frontend.instance-interface-names
[instance_interface_names: <list of strings> | default = [<private network interfaces>]]

# Compress HTTP responses.
# CLI flag: -querier.compress-http-responses
[compress_responses: <boolean> | default = false]

# URL of downstream Loki.
# CLI flag: -frontend.downstream-url
[downstream_url: <string> | default = ""]

# URL of querier for tail proxy.
# CLI flag: -frontend.tail-proxy-url
[tail_proxy_url: <string> | default = ""]

# The TLS configuration.
[tail_tls_config: <tls_config>]

# Deprecated: Use -querier.split-queries-by-interval instead. CLI flag:
# -querier.split-queries-by-day. Split queries by day and execute in parallel.
[split_queries_by_interval: <duration>]

# Mutate incoming queries to align their start and end with their step.
# CLI flag: -querier.align-querier-with-step
[align_queries_with_step: <boolean> | default = false]

results_cache:
  # The cache block configures the cache backend.
  # The CLI flags prefix for this block configuration is: frontend
  [cache: <cache_config>]

  # Use compression in results cache. Supported values are: 'snappy' and ''
  # (disable compression).
  # CLI flag: -frontend.compression
  [compression: <string> | default = ""]

# Cache query results.
# CLI flag: -querier.cache-results
[cache_results: <boolean> | default = false]

# Maximum number of retries for a single request; beyond this, the downstream
# error is returned.
# CLI flag: -querier.max-retries-per-request
[max_retries: <int> | default = 5]

# Perform query parallelisations based on storage sharding configuration and
# query ASTs. This feature is supported only by the chunks storage engine.
# CLI flag: -querier.parallelise-shardable-queries
[parallelise_shardable_queries: <boolean> | default = true]

# List of headers forwarded by the query Frontend to downstream querier.
# CLI flag: -frontend.forward-headers-list
[forward_headers_list: <list of strings> | default = []]

# URL of alerts return path.
# CLI flag: -ruler.external.url
[external_url: <url>]

# Labels to add to all alerts.
[external_labels: <list of Labels>]

# The grpc_client block configures the gRPC client used to communicate between
# two Loki components.
# The CLI flags prefix for this block configuration is: ruler.client
[ruler_client: <grpc_client>]

# How frequently to evaluate rules.
# CLI flag: -ruler.evaluation-interval
[evaluation_interval: <duration> | default = 1m]

# How frequently to poll for rule changes.
# CLI flag: -ruler.poll-interval
[poll_interval: <duration> | default = 1m]

# Deprecated: Use -ruler-storage. CLI flags and their respective YAML config
# options instead.
storage:
  # Method to use for backend rule storage (configdb, azure, gcs, s3, swift,
  # local, bos)
  # CLI flag: -ruler.storage.type
  [type: <string> | default = ""]

  # Configures backend rule storage for Azure.
  # The CLI flags prefix for this block configuration is: ruler.storage
  [azure: <azure_storage_config>]

  # Configures backend rule storage for AlibabaCloud Object Storage (OSS).
  # The CLI flags prefix for this block configuration is: ruler
  [alibabacloud: <alibabacloud_storage_config>]

  # Configures backend rule storage for GCS.
  # The CLI flags prefix for this block configuration is: ruler.storage
  [gcs: <gcs_storage_config>]

  # Configures backend rule storage for S3.
  # The CLI flags prefix for this block configuration is: ruler
  [s3: <s3_storage_config>]

  # Configures backend rule storage for Baidu Object Storage (BOS).
  # The CLI flags prefix for this block configuration is: ruler.storage
  [bos: <bos_storage_config>]

  # Configures backend rule storage for Swift.
  # The CLI flags prefix for this block configuration is: ruler.storage
  [swift: <swift_storage_config>]

  # Configures backend rule storage for a local file system directory.
  local:
    # Directory to scan for rules
    # CLI flag: -ruler.storage.local.directory
    [directory: <string> | default = ""]

# File path to store temporary rule files.
# CLI flag: -ruler.rule-path
[rule_path: <string> | default = "/rules"]

# Comma-separated list of Alertmanager URLs to send notifications to. Each
# Alertmanager URL is treated as a separate group in the configuration. Multiple
# Alertmanagers in HA per group can be supported by using DNS resolution via
# '-ruler.alertmanager-discovery'.
# CLI flag: -ruler.alertmanager-url
[alertmanager_url: <string> | default = ""]

# Use DNS SRV records to discover Alertmanager hosts.
# CLI flag: -ruler.alertmanager-discovery
[enable_alertmanager_discovery: <boolean> | default = false]

# How long to wait between refreshing DNS resolutions of Alertmanager hosts.
# CLI flag: -ruler.alertmanager-refresh-interval
[alertmanager_refresh_interval: <duration> | default = 1m]

# If enabled requests to Alertmanager will utilize the V2 API.
# CLI flag: -ruler.alertmanager-use-v2
[enable_alertmanager_v2: <boolean> | default = false]

# List of alert relabel configs.
[alert_relabel_configs: <relabel_config...>]

# Capacity of the queue for notifications to be sent to the Alertmanager.
# CLI flag: -ruler.notification-queue-capacity
[notification_queue_capacity: <int> | default = 10000]

# HTTP timeout duration when sending notifications to the Alertmanager.
# CLI flag: -ruler.notification-timeout
[notification_timeout: <duration> | default = 10s]

alertmanager_client:
  # Path to the client certificate file, which will be used for authenticating
  # with the server. Also requires the key path to be configured.
  # CLI flag: -ruler.alertmanager-client.tls-cert-path
  [tls_cert_path: <string> | default = ""]

  # Path to the key file for the client certificate. Also requires the client
  # certificate to be configured.
  # CLI flag: -ruler.alertmanager-client.tls-key-path
  [tls_key_path: <string> | default = ""]

  # Path to the CA certificates file to validate server certificate against. If
  # not set, the host's root CA certificates are used.
  # CLI flag: -ruler.alertmanager-client.tls-ca-path
  [tls_ca_path: <string> | default = ""]

  # Override the expected name on the server certificate.
  # CLI flag: -ruler.alertmanager-client.tls-server-name
  [tls_server_name: <string> | default = ""]

  # Skip validating server certificate.
  # CLI flag: -ruler.alertmanager-client.tls-insecure-skip-verify
  [tls_insecure_skip_verify: <boolean> | default = false]

  # Override the default cipher suite list (separated by commas). Allowed
  # values:
  # 
  # Secure Ciphers:
  # - TLS_RSA_WITH_AES_128_CBC_SHA
  # - TLS_RSA_WITH_AES_256_CBC_SHA
  # - TLS_RSA_WITH_AES_128_GCM_SHA256
  # - TLS_RSA_WITH_AES_256_GCM_SHA384
  # - TLS_AES_128_GCM_SHA256
  # - TLS_AES_256_GCM_SHA384
  # - TLS_CHACHA20_POLY1305_SHA256
  # - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
  # - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
  # - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
  # - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
  # - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
  # - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
  # - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
  # - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
  # - TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
  # - TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
  # 
  # Insecure Ciphers:
  # - TLS_RSA_WITH_RC4_128_SHA
  # - TLS_RSA_WITH_3DES_EDE_CBC_SHA
  # - TLS_RSA_WITH_AES_128_CBC_SHA256
  # - TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
  # - TLS_ECDHE_RSA_WITH_RC4_128_SHA
  # - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
  # - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
  # - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
  # CLI flag: -ruler.alertmanager-client.tls-cipher-suites
  [tls_cipher_suites: <string> | default = ""]

  # Override the default minimum TLS version. Allowed values: VersionTLS10,
  # VersionTLS11, VersionTLS12, VersionTLS13
  # CLI flag: -ruler.alertmanager-client.tls-min-version
  [tls_min_version: <string> | default = ""]

  # HTTP Basic authentication username. It overrides the username set in the URL
  # (if any).
  # CLI flag: -ruler.alertmanager-client.basic-auth-username
  [basic_auth_username: <string> | default = ""]

  # HTTP Basic authentication password. It overrides the password set in the URL
  # (if any).
  # CLI flag: -ruler.alertmanager-client.basic-auth-password
  [basic_auth_password: <string> | default = ""]

  # HTTP Header authorization type (default: Bearer).
  # CLI flag: -ruler.alertmanager-client.type
  [type: <string> | default = "Bearer"]

  # HTTP Header authorization credentials.
  # CLI flag: -ruler.alertmanager-client.credentials
  [credentials: <string> | default = ""]

  # HTTP Header authorization credentials file.
  # CLI flag: -ruler.alertmanager-client.credentials-file
  [credentials_file: <string> | default = ""]

# Max time to tolerate outage for restoring "for" state of alert.
# CLI flag: -ruler.for-outage-tolerance
[for_outage_tolerance: <duration> | default = 1h]

# Minimum duration between alert and restored "for" state. This is maintained
# only for alerts with configured "for" time greater than the grace period.
# CLI flag: -ruler.for-grace-period
[for_grace_period: <duration> | default = 10m]

# Minimum amount of time to wait before resending an alert to Alertmanager.
# CLI flag: -ruler.resend-delay
[resend_delay: <duration> | default = 1m]

# Distribute rule evaluation using ring backend.
# CLI flag: -ruler.enable-sharding
[enable_sharding: <boolean> | default = false]

# The sharding strategy to use. Supported values are: default, shuffle-sharding.
# CLI flag: -ruler.sharding-strategy
[sharding_strategy: <string> | default = "default"]

# The sharding algorithm to use for deciding how rules & groups are sharded.
# Supported values are: by-group, by-rule.
# CLI flag: -ruler.sharding-algo
[sharding_algo: <string> | default = "by-group"]

# Time to spend searching for a pending ruler when shutting down.
# CLI flag: -ruler.search-pending-for
[search_pending_for: <duration> | default = 5m]

# Ring used by Loki ruler. The CLI flags prefix for this block configuration is
# 'ruler.ring'.
ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -ruler.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -ruler.ring.prefix
    [prefix: <string> | default = "rulers/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is: ruler.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is: ruler.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -ruler.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -ruler.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -ruler.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -ruler.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Interval between heartbeats sent to the ring. 0 = disabled.
  # CLI flag: -ruler.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 5s]

  # The heartbeat timeout after which ruler ring members are considered
  # unhealthy within the ring. 0 = never (timeout disabled).
  # CLI flag: -ruler.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # Name of network interface to read addresses from.
  # CLI flag: -ruler.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

  # The number of tokens the lifecycler will generate and put into the ring if
  # it joined without transferring tokens from another lifecycler.
  # CLI flag: -ruler.ring.num-tokens
  [num_tokens: <int> | default = 128]

# Period with which to attempt to flush rule groups.
# CLI flag: -ruler.flush-period
[flush_period: <duration> | default = 1m]

# Enable the ruler API.
# CLI flag: -ruler.enable-api
[enable_api: <boolean> | default = true]

# Comma separated list of tenants whose rules this ruler can evaluate. If
# specified, only these tenants will be handled by ruler, otherwise this ruler
# can process rules from all tenants. Subject to sharding.
# CLI flag: -ruler.enabled-tenants
[enabled_tenants: <string> | default = ""]

# Comma separated list of tenants whose rules this ruler cannot evaluate. If
# specified, a ruler that would normally pick the specified tenant(s) for
# processing will ignore them instead. Subject to sharding.
# CLI flag: -ruler.disabled-tenants
[disabled_tenants: <string> | default = ""]

# Report the wall time for ruler queries to complete as a per user metric and as
# an info level log message.
# CLI flag: -ruler.query-stats-enabled
[query_stats_enabled: <boolean> | default = false]

# Disable the rule_group label on exported metrics.
# CLI flag: -ruler.disable-rule-group-label
[disable_rule_group_label: <boolean> | default = false]

wal:
  # The directory in which to write tenant WAL files. Each tenant will have its
  # own directory one level below this directory.
  # CLI flag: -ruler.wal.dir
  [dir: <string> | default = "ruler-wal"]

  # Frequency with which to run the WAL truncation process.
  # CLI flag: -ruler.wal.truncate-frequency
  [truncate_frequency: <duration> | default = 1h]

  # Minimum age that samples must exist in the WAL before being truncated.
  # CLI flag: -ruler.wal.min-age
  [min_age: <duration> | default = 5m]

  # Maximum age that samples must exist in the WAL before being truncated.
  # CLI flag: -ruler.wal.max-age
  [max_age: <duration> | default = 4h]

wal_cleaner:
  # The minimum age of a WAL to consider for cleaning.
  # CLI flag: -ruler.wal-cleaner.min-age
  [min_age: <duration> | default = 12h]

  # Deprecated: CLI flag -ruler.wal-cleaer.period.
  # Use -ruler.wal-cleaner.period instead.
  # 
  # How often to run the WAL cleaner. 0 = disabled.
  # CLI flag: -ruler.wal-cleaner.period
  [period: <duration> | default = 0s]

# Remote-write configuration to send rule samples to a Prometheus remote-write
# endpoint.
remote_write:
  # Deprecated: Use 'clients' instead. Configure remote write client.
  [client: <RemoteWriteConfig>]

  # Configure remote write clients. A map with remote client id as key.
  [clients: <map of string to RemoteWriteConfig>]

  # Enable remote-write functionality.
  # CLI flag: -ruler.remote-write.enabled
  [enabled: <boolean> | default = false]

  # Minimum period to wait between refreshing remote-write reconfigurations.
  # This should be greater than or equivalent to
  # -limits.per-user-override-period.
  # CLI flag: -ruler.remote-write.config-refresh-period
  [config_refresh_period: <duration> | default = 10s]

# Configures how connections are pooled.
pool_config:
  # How frequently to clean up clients for ingesters that have gone away.
  # CLI flag: -distributor.client-cleanup-period
  [client_cleanup_period: <duration> | default = 15s]

  # Run a health check on each ingester client during periodic cleanup.
  # CLI flag: -distributor.health-check-ingesters
  [health_check_ingesters: <boolean> | default = true]

  # How quickly a dead client will be removed after it has been detected to
  # disappear. Set this to a value to allow time for a secondary health check to
  # recover the missing client.
  # CLI flag: -ingester.client.healthcheck-timeout
  [remote_timeout: <duration> | default = 1s]

# The remote request timeout on the client side.
# CLI flag: -ingester.client.timeout
[remote_timeout: <duration> | default = 5s]

# Configures how the gRPC connection to ingesters work as a client.
# The CLI flags prefix for this block configuration is: ingester.client
[grpc_client_config: <grpc_client>]

# Configures how the lifecycle of the ingester will operate and where it will
# register for discovery.
lifecycler:
  ring:
    kvstore:
      # Backend storage to use for the ring. Supported values are: consul, etcd,
      # inmemory, memberlist, multi.
      # CLI flag: -ring.store
      [store: <string> | default = "consul"]

      # The prefix for the keys in the store. Should end with a /.
      # CLI flag: -ring.prefix
      [prefix: <string> | default = "collectors/"]

      # Configuration for a Consul client. Only applies if the selected kvstore
      # is consul.
      [consul: <consul>]

      # Configuration for an ETCD v3 client. Only applies if the selected
      # kvstore is etcd.
      [etcd: <etcd>]

      multi:
        # Primary backend storage used by multi-client.
        # CLI flag: -multi.primary
        [primary: <string> | default = ""]

        # Secondary backend storage used by multi-client.
        # CLI flag: -multi.secondary
        [secondary: <string> | default = ""]

        # Mirror writes to secondary store.
        # CLI flag: -multi.mirror-enabled
        [mirror_enabled: <boolean> | default = false]

        # Timeout for storing value to secondary store.
        # CLI flag: -multi.mirror-timeout
        [mirror_timeout: <duration> | default = 2s]

    # The heartbeat timeout after which ingesters are skipped for reads/writes.
    # 0 = never (timeout disabled).
    # CLI flag: -ring.heartbeat-timeout
    [heartbeat_timeout: <duration> | default = 1m]

    # The number of ingesters to write to and read from.
    # CLI flag: -distributor.replication-factor
    [replication_factor: <int> | default = 3]

    # True to enable the zone-awareness and replicate ingested samples across
    # different availability zones.
    # CLI flag: -distributor.zone-awareness-enabled
    [zone_awareness_enabled: <boolean> | default = false]

    # Comma-separated list of zones to exclude from the ring. Instances in
    # excluded zones will be filtered out from the ring.
    # CLI flag: -distributor.excluded-zones
    [excluded_zones: <string> | default = ""]

  # Number of tokens for each ingester.
  # CLI flag: -ingester.num-tokens
  [num_tokens: <int> | default = 128]

  # Period at which to heartbeat to consul. 0 = disabled.
  # CLI flag: -ingester.heartbeat-period
  [heartbeat_period: <duration> | default = 5s]

  # Heartbeat timeout after which instance is assumed to be unhealthy. 0 =
  # disabled.
  # CLI flag: -ingester.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # Observe tokens after generating to resolve collisions. Useful when using
  # gossiping ring.
  # CLI flag: -ingester.observe-period
  [observe_period: <duration> | default = 0s]

  # Period to wait for a claim from another member; will join automatically
  # after this.
  # CLI flag: -ingester.join-after
  [join_after: <duration> | default = 0s]

  # Minimum duration to wait after the internal readiness checks have passed but
  # before succeeding the readiness endpoint. This is used to slowdown
  # deployment controllers (eg. Kubernetes) after an instance is ready and
  # before they proceed with a rolling update, to give the rest of the cluster
  # instances enough time to receive ring updates.
  # CLI flag: -ingester.min-ready-duration
  [min_ready_duration: <duration> | default = 15s]

  # Name of network interface to read address from.
  # CLI flag: -ingester.lifecycler.interface
  [interface_names: <list of strings> | default = [<private network interfaces>]]

  # Duration to sleep for before exiting, to ensure metrics are scraped.
  # CLI flag: -ingester.final-sleep
  [final_sleep: <duration> | default = 0s]

  # File path where tokens are stored. If empty, tokens are not stored at
  # shutdown and restored at startup.
  # CLI flag: -ingester.tokens-file-path
  [tokens_file_path: <string> | default = ""]

  # The availability zone where this instance is running.
  # CLI flag: -ingester.availability-zone
  [availability_zone: <string> | default = ""]

  # Unregister from the ring upon clean shutdown. It can be useful to disable
  # for rolling restarts with consistent naming in conjunction with
  # -distributor.extend-writes=false.
  # CLI flag: -ingester.unregister-on-shutdown
  [unregister_on_shutdown: <boolean> | default = true]

  # When enabled the readiness probe succeeds only after all instances are
  # ACTIVE and healthy in the ring, otherwise only the instance itself is
  # checked. This option should be disabled if in your cluster multiple
  # instances can be rolled out simultaneously, otherwise rolling updates may be
  # slowed down.
  # CLI flag: -ingester.readiness-check-ring-health
  [readiness_check_ring_health: <boolean> | default = true]

  # IP address to advertise in the ring.
  # CLI flag: -ingester.lifecycler.addr
  [address: <string> | default = ""]

  # port to advertise in consul (defaults to server.grpc-listen-port).
  # CLI flag: -ingester.lifecycler.port
  [port: <int> | default = 0]

  # ID to register in the ring.
  # CLI flag: -ingester.lifecycler.ID
  [id: <string> | default = "<hostname>"]

# Number of times to try and transfer chunks before falling back to flushing. If
# set to 0 or negative value, transfers are disabled.
# CLI flag: -ingester.max-transfer-retries
[max_transfer_retries: <int> | default = 0]

# How many flushes can happen concurrently from each stream.
# CLI flag: -ingester.concurrent-flushes
[concurrent_flushes: <int> | default = 32]

# How often should the ingester see if there are any blocks to flush.
# CLI flag: -ingester.flush-check-period
[flush_check_period: <duration> | default = 30s]

# The timeout before a flush is cancelled.
# CLI flag: -ingester.flush-op-timeout
[flush_op_timeout: <duration> | default = 10m]

# How long chunks should be retained in-memory after they've been flushed.
# CLI flag: -ingester.chunks-retain-period
[chunk_retain_period: <duration> | default = 0s]

# How long chunks should sit in-memory with no updates before being flushed if
# they don't hit the max block size. This means that half-empty chunks will
# still be flushed after a certain period as long as they receive no further
# activity.
# CLI flag: -ingester.chunks-idle-period
[chunk_idle_period: <duration> | default = 30m]

# The targeted _uncompressed_ size in bytes of a chunk block When this threshold
# is exceeded the head block will be cut and compressed inside the chunk.
# CLI flag: -ingester.chunks-block-size
[chunk_block_size: <int> | default = 262144]

# A target _compressed_ size in bytes for chunks. This is a desired size not an
# exact size, chunks may be slightly bigger or significantly smaller if they get
# flushed for other reasons (e.g. chunk_idle_period). A value of 0 creates
# chunks with a fixed 10 blocks, a non zero value will create chunks with a
# variable number of blocks to meet the target size.
# CLI flag: -ingester.chunk-target-size
[chunk_target_size: <int> | default = 1572864]

# The algorithm to use for compressing chunk. (none, gzip, lz4-64k, snappy,
# lz4-256k, lz4-1M, lz4, flate, zstd)
# CLI flag: -ingester.chunk-encoding
[chunk_encoding: <string> | default = "gzip"]

# The maximum duration of a timeseries chunk in memory. If a timeseries runs for
# longer than this, the current chunk will be flushed to the store and a new
# chunk created.
# CLI flag: -ingester.max-chunk-age
[max_chunk_age: <duration> | default = 2h]

# Forget about ingesters having heartbeat timestamps older than
# `ring.kvstore.heartbeat_timeout`. This is equivalent to clicking on the
# `/ring` `forget` button in the UI: the ingester is removed from the ring. This
# is a useful setting when you are sure that an unhealthy node won't return. An
# example is when not using stateful sets or the equivalent. Use
# `memberlist.rejoin_interval` > 0 to handle network partition cases when using
# a memberlist.
# CLI flag: -ingester.autoforget-unhealthy
[autoforget_unhealthy: <boolean> | default = false]

# Parameters used to synchronize ingesters to cut chunks at the same moment.
# Sync period is used to roll over incoming entry to a new chunk. If chunk's
# utilization isn't high enough (eg. less than 50% when sync_min_utilization is
# set to 0.5), then this chunk rollover doesn't happen.
# CLI flag: -ingester.sync-period
[sync_period: <duration> | default = 0s]

# Minimum utilization of chunk when doing synchronization.
# CLI flag: -ingester.sync-min-utilization
[sync_min_utilization: <float> | default = 0]

# The maximum number of errors a stream will report to the user when a push
# fails. 0 to make unlimited.
# CLI flag: -ingester.max-ignored-stream-errors
[max_returned_stream_errors: <int> | default = 10]

# How far back should an ingester be allowed to query the store for data, for
# use only with boltdb-shipper/tsdb index and filesystem object store. -1 for
# infinite.
# CLI flag: -ingester.query-store-max-look-back-period
[query_store_max_look_back_period: <duration> | default = 0s]

# The ingester WAL (Write Ahead Log) records incoming logs and stores them on
# the local file systems in order to guarantee persistence of acknowledged data
# in the event of a process crash.
wal:
  # Enable writing of ingested data into WAL.
  # CLI flag: -ingester.wal-enabled
  [enabled: <boolean> | default = true]

  # Directory where the WAL data is stored and/or recovered from.
  # CLI flag: -ingester.wal-dir
  [dir: <string> | default = "wal"]

  # Interval at which checkpoints should be created.
  # CLI flag: -ingester.checkpoint-duration
  [checkpoint_duration: <duration> | default = 5m]

  # When WAL is enabled, should chunks be flushed to long-term storage on
  # shutdown.
  # CLI flag: -ingester.flush-on-shutdown
  [flush_on_shutdown: <boolean> | default = false]

  # Maximum memory size the WAL may use during replay. After hitting this, it
  # will flush data to storage before continuing. A unit suffix (KB, MB, GB) may
  # be applied.
  # CLI flag: -ingester.wal-replay-memory-ceiling
  [replay_memory_ceiling: <int> | default = 4GB]

# Shard factor used in the ingesters for the in process reverse index. This MUST
# be evenly divisible by ALL schema shard factors or Loki will not start.
# CLI flag: -ingester.index-shards
[index_shards: <int> | default = 32]

# Maximum number of dropped streams to keep in memory during tailing.
# CLI flag: -ingester.tailer.max-dropped-streams
[max_dropped_streams: <int> | default = 10]

# Defines in which mode the index gateway server will operate (default to
# 'simple'). It supports two modes:
# - 'simple': an index gateway server instance is responsible for handling,
# storing and returning requests for all indices for all tenants.
# - 'ring': an index gateway server instance is responsible for a subset of
# tenants instead of all tenants.
# CLI flag: -index-gateway.mode
[mode: <string> | default = "simple"]

# Defines the ring to be used by the index gateway servers and clients in case
# the servers are configured to run in 'ring' mode. In case this isn't
# configured, this block supports inheriting configuration from the common ring
# section.
ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -index-gateway.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -index-gateway.ring.prefix
    [prefix: <string> | default = "collectors/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is: index-gateway.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is: index-gateway.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -index-gateway.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -index-gateway.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -index-gateway.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -index-gateway.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Period at which to heartbeat to the ring. 0 = disabled.
  # CLI flag: -index-gateway.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 15s]

  # The heartbeat timeout after which compactors are considered unhealthy within
  # the ring. 0 = never (timeout disabled).
  # CLI flag: -index-gateway.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # File path where tokens are stored. If empty, tokens are not stored at
  # shutdown and restored at startup.
  # CLI flag: -index-gateway.ring.tokens-file-path
  [tokens_file_path: <string> | default = ""]

  # True to enable zone-awareness and replicate blocks across different
  # availability zones.
  # CLI flag: -index-gateway.ring.zone-awareness-enabled
  [zone_awareness_enabled: <boolean> | default = false]

  # Instance ID to register in the ring.
  # CLI flag: -index-gateway.ring.instance-id
  [instance_id: <string> | default = "<hostname>"]

  # Name of network interface to read address from.
  # CLI flag: -index-gateway.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

  # Port to advertise in the ring (defaults to server.grpc-listen-port).
  # CLI flag: -index-gateway.ring.instance-port
  [instance_port: <int> | default = 0]

  # IP address to advertise in the ring.
  # CLI flag: -index-gateway.ring.instance-addr
  [instance_addr: <string> | default = ""]

  # The availability zone where this instance is running. Required if
  # zone-awareness is enabled.
  # CLI flag: -index-gateway.ring.instance-availability-zone
  [instance_availability_zone: <string> | default = ""]

  # How many index gateway instances are assigned to each tenant.
  # CLI flag: -replication-factor
  [replication_factor: <int> | default = 3]

# The alibabacloud_storage_config block configures the connection to Alibaba
# Cloud Storage object storage backend.
# The CLI flags prefix for this block configuration is: common
[alibabacloud: <alibabacloud_storage_config>]

# The aws_storage_config block configures the connection to dynamoDB and S3
# object storage. Either one of them or both can be configured.
[aws: <aws_storage_config>]

# The azure_storage_config block configures the connection to Azure object
# storage backend.
[azure: <azure_storage_config>]

# The bos_storage_config block configures the connection to Baidu Object Storage
# (BOS) object storage backend.
[bos: <bos_storage_config>]

# Configures storing indexes in Bigtable. Required fields only required when
# bigtable is defined in config.
bigtable:
  # Bigtable project ID.
  # CLI flag: -bigtable.project
  [project: <string> | default = ""]

  # Bigtable instance ID. Please refer to
  # https://cloud.google.com/docs/authentication/production for more information
  # about how to configure authentication.
  # CLI flag: -bigtable.instance
  [instance: <string> | default = ""]

  # The grpc_client block configures the gRPC client used to communicate between
  # two Loki components.
  # The CLI flags prefix for this block configuration is: bigtable
  [grpc_client_config: <grpc_client>]

  # If enabled, once a tables info is fetched, it is cached.
  # CLI flag: -bigtable.table-cache.enabled
  [table_cache_enabled: <boolean> | default = true]

  # Duration to cache tables before checking again.
  # CLI flag: -bigtable.table-cache.expiration
  [table_cache_expiration: <duration> | default = 30m]

# Configures storing chunks in GCS. Required fields only required when gcs is
# defined in config.
[gcs: <gcs_storage_config>]

# Configures storing chunks and/or the index in Cassandra.
cassandra:
  # Comma-separated hostnames or IPs of Cassandra instances.
  # CLI flag: -cassandra.addresses
  [addresses: <string> | default = ""]

  # Port that Cassandra is running on
  # CLI flag: -cassandra.port
  [port: <int> | default = 9042]

  # Keyspace to use in Cassandra.
  # CLI flag: -cassandra.keyspace
  [keyspace: <string> | default = ""]

  # Consistency level for Cassandra.
  # CLI flag: -cassandra.consistency
  [consistency: <string> | default = "QUORUM"]

  # Replication factor to use in Cassandra.
  # CLI flag: -cassandra.replication-factor
  [replication_factor: <int> | default = 3]

  # Instruct the cassandra driver to not attempt to get host info from the
  # system.peers table.
  # CLI flag: -cassandra.disable-initial-host-lookup
  [disable_initial_host_lookup: <boolean> | default = false]

  # Use SSL when connecting to cassandra instances.
  # CLI flag: -cassandra.ssl
  [SSL: <boolean> | default = false]

  # Require SSL certificate validation.
  # CLI flag: -cassandra.host-verification
  [host_verification: <boolean> | default = true]

  # Policy for selecting Cassandra host. Supported values are: round-robin,
  # token-aware.
  # CLI flag: -cassandra.host-selection-policy
  [host_selection_policy: <string> | default = "round-robin"]

  # Path to certificate file to verify the peer.
  # CLI flag: -cassandra.ca-path
  [CA_path: <string> | default = ""]

  # Path to certificate file used by TLS.
  # CLI flag: -cassandra.tls-cert-path
  [tls_cert_path: <string> | default = ""]

  # Path to private key file used by TLS.
  # CLI flag: -cassandra.tls-key-path
  [tls_key_path: <string> | default = ""]

  # Enable password authentication when connecting to cassandra.
  # CLI flag: -cassandra.auth
  [auth: <boolean> | default = false]

  # Username to use when connecting to cassandra.
  # CLI flag: -cassandra.username
  [username: <string> | default = ""]

  # Password to use when connecting to cassandra.
  # CLI flag: -cassandra.password
  [password: <string> | default = ""]

  # File containing password to use when connecting to cassandra.
  # CLI flag: -cassandra.password-file
  [password_file: <string> | default = ""]

  # If set, when authenticating with cassandra a custom authenticator will be
  # expected during the handshake. This flag can be set multiple times.
  # CLI flag: -cassandra.custom-authenticator
  [custom_authenticators: <list of strings> | default = []]

  # Timeout when connecting to cassandra.
  # CLI flag: -cassandra.timeout
  [timeout: <duration> | default = 2s]

  # Initial connection timeout, used during initial dial to server.
  # CLI flag: -cassandra.connect-timeout
  [connect_timeout: <duration> | default = 5s]

  # Interval to retry connecting to cassandra nodes marked as DOWN.
  # CLI flag: -cassandra.reconnent-interval
  [reconnect_interval: <duration> | default = 1s]

  # Number of retries to perform on a request. Set to 0 to disable retries.
  # CLI flag: -cassandra.max-retries
  [max_retries: <int> | default = 0]

  # Maximum time to wait before retrying a failed request.
  # CLI flag: -cassandra.retry-max-backoff
  [retry_max_backoff: <duration> | default = 10s]

  # Minimum time to wait before retrying a failed request.
  # CLI flag: -cassandra.retry-min-backoff
  [retry_min_backoff: <duration> | default = 100ms]

  # Limit number of concurrent queries to Cassandra. Set to 0 to disable the
  # limit.
  # CLI flag: -cassandra.query-concurrency
  [query_concurrency: <int> | default = 0]

  # Number of TCP connections per host.
  # CLI flag: -cassandra.num-connections
  [num_connections: <int> | default = 2]

  # Convict hosts of being down on failure.
  # CLI flag: -cassandra.convict-hosts-on-failure
  [convict_hosts_on_failure: <boolean> | default = true]

  # Table options used to create index or chunk tables. This value is used as
  # plain text in the table `WITH` like this, "CREATE TABLE
  # <generated_by_cortex> (...) WITH <cassandra.table-options>". For details,
  # see https://cortexmetrics.io/docs/production/cassandra. By default it will
  # use the default table options of your Cassandra cluster.
  # CLI flag: -cassandra.table-options
  [table_options: <string> | default = ""]

# Configures storing index in BoltDB. Required fields only required when boltdb
# is present in the configuration.
boltdb:
  # Location of BoltDB index files.
  # CLI flag: -boltdb.dir
  [directory: <string> | default = ""]

# Configures storing the chunks on the local file system. Required fields only
# required when filesystem is present in the configuration.
[filesystem: <local_storage_config>]

# The swift_storage_config block configures the connection to OpenStack Object
# Storage (Swift) object storage backend.
[swift: <swift_storage_config>]

grpc_store:
  # Hostname or IP of the gRPC store instance.
  # CLI flag: -grpc-store.server-address
  [server_address: <string> | default = ""]

hedging:
  # If set to a non-zero value a second request will be issued at the provided
  # duration. Default is 0 (disabled)
  # CLI flag: -store.hedge-requests-at
  [at: <duration> | default = 0s]

  # The maximum of hedge requests allowed.
  # CLI flag: -store.hedge-requests-up-to
  [up_to: <int> | default = 2]

  # The maximum of hedge requests allowed per seconds.
  # CLI flag: -store.hedge-max-per-second
  [max_per_second: <int> | default = 5]

# Configures additional object stores for a given storage provider.
# Supported stores: aws, azure, bos, filesystem, gcs, swift.
# Example:
# storage_config:
#   named_stores:
#     aws:
#       store-1:
#         endpoint: s3://foo-bucket
#         region: us-west1
# Named store from this example can be used by setting object_store to store-1
# in period_config.
[named_stores: <named_stores_config>]

# Cache validity for active index entries. Should be no higher than
# -ingester.max-chunk-idle.
# CLI flag: -store.index-cache-validity
[index_cache_validity: <duration> | default = 5m]

# The cache block configures the cache backend.
# The CLI flags prefix for this block configuration is: store.index-cache-read
[index_queries_cache_config: <cache_config>]

# Disable broad index queries which results in reduced cache usage and faster
# query performance at the expense of somewhat higher QPS on the index store.
# CLI flag: -store.disable-broad-index-queries
[disable_broad_index_queries: <boolean> | default = false]

# Maximum number of parallel chunk reads.
# CLI flag: -store.max-parallel-get-chunk
[max_parallel_get_chunk: <int> | default = 150]

# The maximum number of chunks to fetch per batch.
# CLI flag: -store.max-chunk-batch-size
[max_chunk_batch_size: <int> | default = 50]

# Configures storing index in an Object Store (GCS/S3/Azure/Swift/Filesystem) in
# the form of boltdb files. Required fields only required when boltdb-shipper is
# defined in config.
boltdb_shipper:
  # Directory where ingesters would write index files which would then be
  # uploaded by shipper to configured storage
  # CLI flag: -boltdb.shipper.active-index-directory
  [active_index_directory: <string> | default = ""]

  # Shared store for keeping index files. Supported types: gcs, s3, azure,
  # filesystem
  # CLI flag: -boltdb.shipper.shared-store
  [shared_store: <string> | default = ""]

  # Prefix to add to Object Keys in Shared store. Path separator(if any) should
  # always be a '/'. Prefix should never start with a separator but should
  # always end with it
  # CLI flag: -boltdb.shipper.shared-store.key-prefix
  [shared_store_key_prefix: <string> | default = "index/"]

  # Cache location for restoring index files from storage for queries
  # CLI flag: -boltdb.shipper.cache-location
  [cache_location: <string> | default = ""]

  # TTL for index files restored in cache for queries
  # CLI flag: -boltdb.shipper.cache-ttl
  [cache_ttl: <duration> | default = 24h]

  # Resync downloaded files with the storage
  # CLI flag: -boltdb.shipper.resync-interval
  [resync_interval: <duration> | default = 5m]

  # Number of days of common index to be kept downloaded for queries. For per
  # tenant index query readiness, use limits overrides config.
  # CLI flag: -boltdb.shipper.query-ready-num-days
  [query_ready_num_days: <int> | default = 0]

  index_gateway_client:
    # The grpc_client block configures the gRPC client used to communicate
    # between two Loki components.
    # The CLI flags prefix for this block configuration is:
    # boltdb.shipper.index-gateway-client.grpc
    [grpc_client_config: <grpc_client>]

    # Hostname or IP of the Index Gateway gRPC server running in simple mode.
    # CLI flag: -boltdb.shipper.index-gateway-client.server-address
    [server_address: <string> | default = ""]

    # Whether requests sent to the gateway should be logged or not.
    # CLI flag: -boltdb.shipper.index-gateway-client.log-gateway-requests
    [log_gateway_requests: <boolean> | default = false]

  # Use boltdb-shipper index store as backup for indexing chunks. When enabled,
  # boltdb-shipper needs to be configured under storage_config
  # CLI flag: -boltdb.shipper.use-boltdb-shipper-as-backup
  [use_boltdb_shipper_as_backup: <boolean> | default = false]

  [ingestername: <string> | default = ""]

  [mode: <string> | default = ""]

  [ingesterdbretainperiod: <duration>]

  # Build per tenant index files
  # CLI flag: -boltdb.shipper.build-per-tenant-index
  [build_per_tenant_index: <boolean> | default = false]

tsdb_shipper:
  # Directory where ingesters would write index files which would then be
  # uploaded by shipper to configured storage
  # CLI flag: -tsdb.shipper.active-index-directory
  [active_index_directory: <string> | default = ""]

  # Shared store for keeping index files. Supported types: gcs, s3, azure,
  # filesystem
  # CLI flag: -tsdb.shipper.shared-store
  [shared_store: <string> | default = ""]

  # Prefix to add to Object Keys in Shared store. Path separator(if any) should
  # always be a '/'. Prefix should never start with a separator but should
  # always end with it
  # CLI flag: -tsdb.shipper.shared-store.key-prefix
  [shared_store_key_prefix: <string> | default = "index/"]

  # Cache location for restoring index files from storage for queries
  # CLI flag: -tsdb.shipper.cache-location
  [cache_location: <string> | default = ""]

  # TTL for index files restored in cache for queries
  # CLI flag: -tsdb.shipper.cache-ttl
  [cache_ttl: <duration> | default = 24h]

  # Resync downloaded files with the storage
  # CLI flag: -tsdb.shipper.resync-interval
  [resync_interval: <duration> | default = 5m]

  # Number of days of common index to be kept downloaded for queries. For per
  # tenant index query readiness, use limits overrides config.
  # CLI flag: -tsdb.shipper.query-ready-num-days
  [query_ready_num_days: <int> | default = 0]

  index_gateway_client:
    # The grpc_client block configures the gRPC client used to communicate
    # between two Loki components.
    # The CLI flags prefix for this block configuration is:
    # tsdb.shipper.index-gateway-client.grpc
    [grpc_client_config: <grpc_client>]

    # Hostname or IP of the Index Gateway gRPC server running in simple mode.
    # CLI flag: -tsdb.shipper.index-gateway-client.server-address
    [server_address: <string> | default = ""]

    # Whether requests sent to the gateway should be logged or not.
    # CLI flag: -tsdb.shipper.index-gateway-client.log-gateway-requests
    [log_gateway_requests: <boolean> | default = false]

  # Use boltdb-shipper index store as backup for indexing chunks. When enabled,
  # boltdb-shipper needs to be configured under storage_config
  # CLI flag: -tsdb.shipper.use-boltdb-shipper-as-backup
  [use_boltdb_shipper_as_backup: <boolean> | default = false]

  [ingestername: <string> | default = ""]

  [mode: <string> | default = ""]

  [ingesterdbretainperiod: <duration>]

# The cache block configures the cache backend.
# The CLI flags prefix for this block configuration is: store.chunks-cache
[chunk_cache_config: <cache_config>]

# The cache block configures the cache backend.
# The CLI flags prefix for this block configuration is: store.index-cache-write
[write_dedupe_cache_config: <cache_config>]

# Cache index entries older than this period. 0 to disable.
# CLI flag: -store.cache-lookups-older-than
[cache_lookups_older_than: <duration> | default = 0s]

# This flag is deprecated. Use -querier.max-query-lookback instead.
# CLI flag: -store.max-look-back-period
[max_look_back_period: <duration> | default = 0s]

[configs: <list of period_configs>]

# Directory where files can be downloaded for compaction.
# CLI flag: -boltdb.shipper.compactor.working-directory
[working_directory: <string> | default = ""]

# The shared store used for storing boltdb files. Supported types: gcs, s3,
# azure, swift, filesystem, bos.
# CLI flag: -boltdb.shipper.compactor.shared-store
[shared_store: <string> | default = ""]

# Prefix to add to object keys in shared store. Path separator(if any) should
# always be a '/'. Prefix should never start with a separator but should always
# end with it.
# CLI flag: -boltdb.shipper.compactor.shared-store.key-prefix
[shared_store_key_prefix: <string> | default = "index/"]

# Interval at which to re-run the compaction operation.
# CLI flag: -boltdb.shipper.compactor.compaction-interval
[compaction_interval: <duration> | default = 10m]

# Interval at which to apply/enforce retention. 0 means run at same interval as
# compaction. If non-zero, it should always be a multiple of compaction
# interval.
# CLI flag: -boltdb.shipper.compactor.apply-retention-interval
[apply_retention_interval: <duration> | default = 0s]

# (Experimental) Activate custom (per-stream,per-tenant) retention.
# CLI flag: -boltdb.shipper.compactor.retention-enabled
[retention_enabled: <boolean> | default = false]

# Delay after which chunks will be fully deleted during retention.
# CLI flag: -boltdb.shipper.compactor.retention-delete-delay
[retention_delete_delay: <duration> | default = 2h]

# The total amount of worker to use to delete chunks.
# CLI flag: -boltdb.shipper.compactor.retention-delete-worker-count
[retention_delete_worker_count: <int> | default = 150]

# The maximum amount of time to spend running retention and deletion on any
# given table in the index.
# CLI flag: -boltdb.shipper.compactor.retention-table-timeout
[retention_table_timeout: <duration> | default = 0s]

# The max number of delete requests to run per compaction cycle.
# CLI flag: -boltdb.shipper.compactor.delete-batch-size
[delete_batch_size: <int> | default = 70]

# Allow cancellation of delete request until duration after they are created.
# Data would be deleted only after delete requests have been older than this
# duration. Ideally this should be set to at least 24h.
# CLI flag: -boltdb.shipper.compactor.delete-request-cancel-period
[delete_request_cancel_period: <duration> | default = 24h]

# Constrain the size of any single delete request. When a delete request >
# delete_max_interval is input, the request is sharded into smaller requests of
# no more than delete_max_interval
# CLI flag: -boltdb.shipper.compactor.delete-max-interval
[delete_max_interval: <duration> | default = 0s]

# Maximum number of tables to compact in parallel. While increasing this value,
# please make sure compactor has enough disk space allocated to be able to store
# and compact as many tables.
# CLI flag: -boltdb.shipper.compactor.max-compaction-parallelism
[max_compaction_parallelism: <int> | default = 1]

# Number of upload/remove operations to execute in parallel when finalizing a
# compaction. NOTE: This setting is per compaction operation, which can be
# executed in parallel. The upper bound on the number of concurrent uploads is
# upload_parallelism * max_compaction_parallelism.
# CLI flag: -boltdb.shipper.compactor.upload-parallelism
[upload_parallelism: <int> | default = 10]

# The hash ring configuration used by compactors to elect a single instance for
# running compactions. The CLI flags prefix for this block config is:
# boltdb.shipper.compactor.ring
compactor_ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -boltdb.shipper.compactor.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -boltdb.shipper.compactor.ring.prefix
    [prefix: <string> | default = "collectors/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is:
    # boltdb.shipper.compactor.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is:
    # boltdb.shipper.compactor.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -boltdb.shipper.compactor.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -boltdb.shipper.compactor.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -boltdb.shipper.compactor.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -boltdb.shipper.compactor.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Period at which to heartbeat to the ring. 0 = disabled.
  # CLI flag: -boltdb.shipper.compactor.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 15s]

  # The heartbeat timeout after which compactors are considered unhealthy within
  # the ring. 0 = never (timeout disabled).
  # CLI flag: -boltdb.shipper.compactor.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # File path where tokens are stored. If empty, tokens are not stored at
  # shutdown and restored at startup.
  # CLI flag: -boltdb.shipper.compactor.ring.tokens-file-path
  [tokens_file_path: <string> | default = ""]

  # True to enable zone-awareness and replicate blocks across different
  # availability zones.
  # CLI flag: -boltdb.shipper.compactor.ring.zone-awareness-enabled
  [zone_awareness_enabled: <boolean> | default = false]

  # Instance ID to register in the ring.
  # CLI flag: -boltdb.shipper.compactor.ring.instance-id
  [instance_id: <string> | default = "<hostname>"]

  # Name of network interface to read address from.
  # CLI flag: -boltdb.shipper.compactor.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

  # Port to advertise in the ring (defaults to server.grpc-listen-port).
  # CLI flag: -boltdb.shipper.compactor.ring.instance-port
  [instance_port: <int> | default = 0]

  # IP address to advertise in the ring.
  # CLI flag: -boltdb.shipper.compactor.ring.instance-addr
  [instance_addr: <string> | default = ""]

  # The availability zone where this instance is running. Required if
  # zone-awareness is enabled.
  # CLI flag: -boltdb.shipper.compactor.ring.instance-availability-zone
  [instance_availability_zone: <string> | default = ""]

# Number of tables that compactor will try to compact. Newer tables are chosen
# when this is less than the number of tables available.
# CLI flag: -boltdb.shipper.compactor.tables-to-compact
[tables_to_compact: <int> | default = 0]

# Do not compact N latest tables. Together with
# -boltdb.shipper.compactor.run-once and
# -boltdb.shipper.compactor.tables-to-compact, this is useful when clearing
# compactor backlogs.
# CLI flag: -boltdb.shipper.compactor.skip-latest-n-tables
[skip_latest_n_tables: <int> | default = 0]

# Deprecated: Use deletion_mode per tenant configuration instead.
[deletion_mode: <string> | default = ""]

# Whether the ingestion rate limit should be applied individually to each
# distributor instance (local), or evenly shared across the cluster (global).
# The ingestion rate strategy cannot be overridden on a per-tenant basis.
# - local: enforces the limit on a per distributor basis. The actual effective
# rate limit will be N times higher, where N is the number of distributor
# replicas.
# - global: enforces the limit globally, configuring a per-distributor local
# rate limiter as 'ingestion_rate / N', where N is the number of distributor
# replicas (it's automatically adjusted if the number of replicas change). The
# global strategy requires the distributors to form their own ring, which is
# used to keep track of the current number of healthy distributor replicas.
# CLI flag: -distributor.ingestion-rate-limit-strategy
[ingestion_rate_strategy: <string> | default = "global"]

# Per-user ingestion rate limit in sample size per second. Units in MB.
# CLI flag: -distributor.ingestion-rate-limit-mb
[ingestion_rate_mb: <float> | default = 4]

# Per-user allowed ingestion burst size (in sample size). Units in MB. The burst
# size refers to the per-distributor local rate limiter even in the case of the
# 'global' strategy, and should be set at least to the maximum logs size
# expected in a single push request.
# CLI flag: -distributor.ingestion-burst-size-mb
[ingestion_burst_size_mb: <float> | default = 6]

# Maximum length accepted for label names.
# CLI flag: -validation.max-length-label-name
[max_label_name_length: <int> | default = 1024]

# Maximum length accepted for label value. This setting also applies to the
# metric name.
# CLI flag: -validation.max-length-label-value
[max_label_value_length: <int> | default = 2048]

# Maximum number of label names per series.
# CLI flag: -validation.max-label-names-per-series
[max_label_names_per_series: <int> | default = 30]

# Whether or not old samples will be rejected.
# CLI flag: -validation.reject-old-samples
[reject_old_samples: <boolean> | default = true]

# Maximum accepted sample age before rejecting.
# CLI flag: -validation.reject-old-samples.max-age
[reject_old_samples_max_age: <duration> | default = 1w]

# Duration which table will be created/deleted before/after it's needed; we
# won't accept sample from before this time.
# CLI flag: -validation.create-grace-period
[creation_grace_period: <duration> | default = 10m]

# Enforce every sample has a metric name.
# CLI flag: -validation.enforce-metric-name
[enforce_metric_name: <boolean> | default = true]

# Maximum line size on ingestion path. Example: 256kb. Any log line exceeding
# this limit will be discarded unless `distributor.max-line-size-truncate` is
# set which in case it is truncated instead of discarding it completely. There
# is no limit when unset or set to 0.
# CLI flag: -distributor.max-line-size
[max_line_size: <int> | default = 0B]

# Whether to truncate lines that exceed max_line_size.
# CLI flag: -distributor.max-line-size-truncate
[max_line_size_truncate: <boolean> | default = false]

# Alter the log line timestamp during ingestion when the timestamp is the same
# as the previous entry for the same stream. When enabled, if a log line in a
# push request has the same timestamp as the previous line for the same stream,
# one nanosecond is added to the log line. This will preserve the received order
# of log lines with the exact same timestamp when they are queried, by slightly
# altering their stored timestamp. NOTE: This is imperfect, because Loki accepts
# out of order writes, and another push request for the same stream could
# contain duplicate timestamps to existing entries and they will not be
# incremented.
# CLI flag: -validation.increment-duplicate-timestamps
[increment_duplicate_timestamp: <boolean> | default = false]

# Maximum number of active streams per user, per ingester. 0 to disable.
# CLI flag: -ingester.max-streams-per-user
[max_streams_per_user: <int> | default = 0]

# Maximum number of active streams per user, across the cluster. 0 to disable.
# When the global limit is enabled, each ingester is configured with a dynamic
# local limit based on the replication factor and the current number of healthy
# ingesters, and is kept updated whenever the number of ingesters change.
# CLI flag: -ingester.max-global-streams-per-user
[max_global_streams_per_user: <int> | default = 5000]

# When true, out-of-order writes are accepted.
# CLI flag: -ingester.unordered-writes
[unordered_writes: <boolean> | default = true]

# Maximum byte rate per second per stream, also expressible in human readable
# forms (1MB, 256KB, etc).
# CLI flag: -ingester.per-stream-rate-limit
[per_stream_rate_limit: <int> | default = 3MB]

# Maximum burst bytes per stream, also expressible in human readable forms (1MB,
# 256KB, etc). This is how far above the rate limit a stream can 'burst' before
# the stream is limited.
# CLI flag: -ingester.per-stream-rate-limit-burst
[per_stream_rate_limit_burst: <int> | default = 15MB]

# Maximum number of chunks that can be fetched in a single query.
# CLI flag: -store.query-chunk-limit
[max_chunks_per_query: <int> | default = 2000000]

# Limit the maximum of unique series that is returned by a metric query. When
# the limit is reached an error is returned.
# CLI flag: -querier.max-query-series
[max_query_series: <int> | default = 500]

# Limit how far back in time series data and metadata can be queried, up until
# lookback duration ago. This limit is enforced in the query frontend, the
# querier and the ruler. If the requested time range is outside the allowed
# range, the request will not fail, but will be modified to only query data
# within the allowed time range. The default value of 0 does not set a limit.
# CLI flag: -querier.max-query-lookback
[max_query_lookback: <duration> | default = 0s]

# The limit to length of chunk store queries. 0 to disable.
# CLI flag: -store.max-query-length
[max_query_length: <duration> | default = 30d1h]

# Maximum number of queries that will be scheduled in parallel by the frontend.
# CLI flag: -querier.max-query-parallelism
[max_query_parallelism: <int> | default = 32]

# Maximum number of queries will be scheduled in parallel by the frontend for
# TSDB schemas.
# CLI flag: -querier.tsdb-max-query-parallelism
[tsdb_max_query_parallelism: <int> | default = 512]

# Cardinality limit for index queries.
# CLI flag: -store.cardinality-limit
[cardinality_limit: <int> | default = 100000]

# Maximum number of stream matchers per query.
# CLI flag: -querier.max-streams-matcher-per-query
[max_streams_matchers_per_query: <int> | default = 1000]

# Maximum number of concurrent tail requests.
# CLI flag: -querier.max-concurrent-tail-requests
[max_concurrent_tail_requests: <int> | default = 10]

# Maximum number of log entries that will be returned for a query.
# CLI flag: -validation.max-entries-limit
[max_entries_limit_per_query: <int> | default = 5000]

# Most recent allowed cacheable result per-tenant, to prevent caching very
# recent results that might still be in flux.
# CLI flag: -frontend.max-cache-freshness
[max_cache_freshness_per_query: <duration> | default = 1m]

# Maximum number of queriers that can handle requests for a single tenant. If
# set to 0 or value higher than number of available queriers, *all* queriers
# will handle requests for the tenant. Each frontend (or query-scheduler, if
# used) will select the same set of queriers for the same tenant (given that all
# queriers are connected to all frontends / query-schedulers). This option only
# works with queriers connecting to the query-frontend / query-scheduler, not
# when using downstream URL.
# CLI flag: -frontend.max-queriers-per-tenant
[max_queriers_per_tenant: <int> | default = 0]

# Number of days of index to be kept always downloaded for queries. Applies only
# to per user index in boltdb-shipper index store. 0 to disable.
# CLI flag: -store.query-ready-index-num-days
[query_ready_index_num_days: <int> | default = 0]

# Timeout when querying backends (ingesters or storage) during the execution of
# a query request. If a specific per-tenant timeout is used, this timeout is
# ignored.
# CLI flag: -querier.query-timeout
[query_timeout: <duration> | default = 1m]

# Split queries by a time interval and execute in parallel. The value 0 disables
# splitting by time. This also determines how cache keys are chosen when result
# caching is enabled.
# CLI flag: -querier.split-queries-by-interval
[split_queries_by_interval: <duration> | default = 30m]

# Limit queries that can be sharded. Queries within the time range of now and
# now minus this sharding lookback are not sharded. The default value of 0s
# disables the lookback, causing sharding of all queries at all times.
# CLI flag: -frontend.min-sharding-lookback
[min_sharding_lookback: <duration> | default = 0s]

# Duration to delay the evaluation of rules to ensure the underlying metrics
# have been pushed to Cortex.
# CLI flag: -ruler.evaluation-delay-duration
[ruler_evaluation_delay_duration: <duration> | default = 0s]

# Maximum number of rules per rule group per-tenant. 0 to disable.
# CLI flag: -ruler.max-rules-per-rule-group
[ruler_max_rules_per_rule_group: <int> | default = 0]

# Maximum number of rule groups per-tenant. 0 to disable.
# CLI flag: -ruler.max-rule-groups-per-tenant
[ruler_max_rule_groups_per_tenant: <int> | default = 0]

# The default tenant's shard size when shuffle-sharding is enabled in the ruler.
# When this setting is specified in the per-tenant overrides, a value of 0
# disables shuffle sharding for the tenant.
# CLI flag: -ruler.tenant-shard-size
[ruler_tenant_shard_size: <int> | default = 0]

# Disable recording rules remote-write.
[ruler_remote_write_disabled: <boolean>]

# Deprecated: Use 'ruler_remote_write_config' instead. The URL of the endpoint
# to send samples to.
[ruler_remote_write_url: <string> | default = ""]

# Deprecated: Use 'ruler_remote_write_config' instead. Timeout for requests to
# the remote write endpoint.
[ruler_remote_write_timeout: <duration>]

# Deprecated: Use 'ruler_remote_write_config' instead. Custom HTTP headers to be
# sent along with each remote write request. Be aware that headers that are set
# by Loki itself can't be overwritten.
[ruler_remote_write_headers: <headers>]

# Deprecated: Use 'ruler_remote_write_config' instead. List of remote write
# relabel configurations.
[ruler_remote_write_relabel_configs: <relabel_config...>]

# Deprecated: Use 'ruler_remote_write_config' instead. Number of samples to
# buffer per shard before we block reading of more samples from the WAL. It is
# recommended to have enough capacity in each shard to buffer several requests
# to keep throughput up while processing occasional slow remote requests.
[ruler_remote_write_queue_capacity: <int>]

# Deprecated: Use 'ruler_remote_write_config' instead. Minimum number of shards,
# i.e. amount of concurrency.
[ruler_remote_write_queue_min_shards: <int>]

# Deprecated: Use 'ruler_remote_write_config' instead. Maximum number of shards,
# i.e. amount of concurrency.
[ruler_remote_write_queue_max_shards: <int>]

# Deprecated: Use 'ruler_remote_write_config' instead. Maximum number of samples
# per send.
[ruler_remote_write_queue_max_samples_per_send: <int>]

# Deprecated: Use 'ruler_remote_write_config' instead. Maximum time a sample
# will wait in buffer.
[ruler_remote_write_queue_batch_send_deadline: <duration>]

# Deprecated: Use 'ruler_remote_write_config' instead. Initial retry delay. Gets
# doubled for every retry.
[ruler_remote_write_queue_min_backoff: <duration>]

# Deprecated: Use 'ruler_remote_write_config' instead. Maximum retry delay.
[ruler_remote_write_queue_max_backoff: <duration>]

# Deprecated: Use 'ruler_remote_write_config' instead. Retry upon receiving a
# 429 status code from the remote-write storage. This is experimental and might
# change in the future.
[ruler_remote_write_queue_retry_on_ratelimit: <boolean>]

# Deprecated: Use 'ruler_remote_write_config' instead. Configures AWS's
# Signature Verification 4 signing process to sign every remote write request.
ruler_remote_write_sigv4_config:
  [region: <string> | default = ""]

  [access_key: <string> | default = ""]

  [secret_key: <string> | default = ""]

  [profile: <string> | default = ""]

  [role_arn: <string> | default = ""]

# Configures global and per-tenant limits for remote write clients. A map with
# remote client id as key.
[ruler_remote_write_config: <map of string to RemoteWriteConfig>]

# Deletion mode. Can be one of 'disabled', 'filter-only', or
# 'filter-and-delete'. When set to 'filter-only' or 'filter-and-delete', and if
# retention_enabled is true, then the log entry deletion API endpoints are
# available.
# CLI flag: -compactor.deletion-mode
[deletion_mode: <string> | default = "filter-and-delete"]

# Retention period to apply to stored data, only applies if retention_enabled is
# true in the compactor config. As of version 2.8.0, a zero value of 0 or 0s
# disables retention. In previous releases, Loki did not properly honor a zero
# value to disable retention and a really large value should be used instead.
# CLI flag: -store.retention
[retention_period: <duration> | default = 0s]

# Per-stream retention to apply, if the retention is enable on the compactor
# side.
# Example:
#  retention_stream:
#  - selector: '{namespace="dev"}'
#  priority: 1
#  period: 24h
# - selector: '{container="nginx"}'
#  priority: 1
#  period: 744h
# Selector is a Prometheus labels matchers that will apply the 'period'
# retention only if the stream is matching. In case multiple stream are
# matching, the highest priority will be picked. If no rule is matched the
# 'retention_period' is used.
[retention_stream: <list of StreamRetentions>]

# Feature renamed to 'runtime configuration', flag deprecated in favor of
# -runtime-config.file (runtime_config.file in YAML).
# CLI flag: -limits.per-user-override-config
[per_tenant_override_config: <string> | default = ""]

# Feature renamed to 'runtime configuration'; flag deprecated in favor of
# -runtime-config.reload-period (runtime_config.period in YAML).
# CLI flag: -limits.per-user-override-period
[per_tenant_override_period: <duration> | default = 10s]

# Deprecated: Use deletion_mode per tenant configuration instead.
[allow_deletes: <boolean>]

shard_streams:
  [enabled: <boolean>]

  [logging_enabled: <boolean>]

  [desired_rate: <int>]

[blocked_queries: <blocked_query...>]

# Address of query frontend service, in host:port format. If
# -querier.scheduler-address is set as well, querier will use scheduler instead.
# Only one of -querier.frontend-address or -querier.scheduler-address can be
# set. If neither is set, queries are only received via HTTP endpoint.
# CLI flag: -querier.frontend-address
[frontend_address: <string> | default = ""]

# Hostname (and port) of scheduler that querier will periodically resolve,
# connect to and receive queries from. Only one of -querier.frontend-address or
# -querier.scheduler-address can be set. If neither is set, queries are only
# received via HTTP endpoint.
# CLI flag: -querier.scheduler-address
[scheduler_address: <string> | default = ""]

# How often to query DNS for query-frontend or query-scheduler address. Also
# used to determine how often to poll the scheduler-ring for addresses if the
# scheduler-ring is configured.
# CLI flag: -querier.dns-lookup-period
[dns_lookup_duration: <duration> | default = 3s]

# Number of simultaneous queries to process per query-frontend or
# query-scheduler.
# CLI flag: -querier.worker-parallelism
[parallelism: <int> | default = 10]

# Force worker concurrency to match the -querier.max-concurrent option.
# Overrides querier.worker-parallelism.
# CLI flag: -querier.worker-match-max-concurrent
[match_max_concurrent: <boolean> | default = true]

# Querier ID, sent to frontend service to identify requests from the same
# querier. Defaults to hostname.
# CLI flag: -querier.id
[id: <string> | default = ""]

# The grpc_client block configures the gRPC client used to communicate between
# two Loki components.
# The CLI flags prefix for this block configuration is: querier.frontend-client
[grpc_client_config: <grpc_client>]

# If true, disable all changes to DB capacity
# CLI flag: -table-manager.throughput-updates-disabled
[throughput_updates_disabled: <boolean> | default = false]

# If true, enables retention deletes of DB tables
# CLI flag: -table-manager.retention-deletes-enabled
[retention_deletes_enabled: <boolean> | default = false]

# Tables older than this retention period are deleted. Must be either 0
# (disabled) or a multiple of 24h. When enabled, be aware this setting is
# destructive to data!
# CLI flag: -table-manager.retention-period
[retention_period: <duration> | default = 0s]

# How frequently to poll backend to learn our capacity.
# CLI flag: -table-manager.poll-interval
[poll_interval: <duration> | default = 2m]

# Periodic tables grace period (duration which table will be created/deleted
# before/after it's needed).
# CLI flag: -table-manager.periodic-table.grace-period
[creation_grace_period: <duration> | default = 10m]

index_tables_provisioning:
  # Enables on demand throughput provisioning for the storage provider (if
  # supported). Applies only to tables which are not autoscaled. Supported by
  # DynamoDB
  # CLI flag: -table-manager.index-table.enable-ondemand-throughput-mode
  [enable_ondemand_throughput_mode: <boolean> | default = false]

  # Table default write throughput. Supported by DynamoDB
  # CLI flag: -table-manager.index-table.write-throughput
  [provisioned_write_throughput: <int> | default = 1000]

  # Table default read throughput. Supported by DynamoDB
  # CLI flag: -table-manager.index-table.read-throughput
  [provisioned_read_throughput: <int> | default = 300]

  write_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.index-table.write-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.index-table.write-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.index-table.write-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.index-table.write-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.index-table.write-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.index-table.write-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.index-table.write-throughput.scale.target-value
    [target: <float> | default = 80]

  read_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.index-table.read-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.index-table.read-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.index-table.read-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.index-table.read-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.index-table.read-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.index-table.read-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.index-table.read-throughput.scale.target-value
    [target: <float> | default = 80]

  # Enables on demand throughput provisioning for the storage provider (if
  # supported). Applies only to tables which are not autoscaled. Supported by
  # DynamoDB
  # CLI flag: -table-manager.index-table.inactive-enable-ondemand-throughput-mode
  [enable_inactive_throughput_on_demand_mode: <boolean> | default = false]

  # Table write throughput for inactive tables. Supported by DynamoDB
  # CLI flag: -table-manager.index-table.inactive-write-throughput
  [inactive_write_throughput: <int> | default = 1]

  # Table read throughput for inactive tables. Supported by DynamoDB
  # CLI flag: -table-manager.index-table.inactive-read-throughput
  [inactive_read_throughput: <int> | default = 300]

  inactive_write_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.index-table.inactive-write-throughput.scale.target-value
    [target: <float> | default = 80]

  inactive_read_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.index-table.inactive-read-throughput.scale.target-value
    [target: <float> | default = 80]

  # Number of last inactive tables to enable write autoscale.
  # CLI flag: -table-manager.index-table.inactive-write-throughput.scale-last-n
  [inactive_write_scale_lastn: <int> | default = 4]

  # Number of last inactive tables to enable read autoscale.
  # CLI flag: -table-manager.index-table.inactive-read-throughput.scale-last-n
  [inactive_read_scale_lastn: <int> | default = 4]

chunk_tables_provisioning:
  # Enables on demand throughput provisioning for the storage provider (if
  # supported). Applies only to tables which are not autoscaled. Supported by
  # DynamoDB
  # CLI flag: -table-manager.chunk-table.enable-ondemand-throughput-mode
  [enable_ondemand_throughput_mode: <boolean> | default = false]

  # Table default write throughput. Supported by DynamoDB
  # CLI flag: -table-manager.chunk-table.write-throughput
  [provisioned_write_throughput: <int> | default = 1000]

  # Table default read throughput. Supported by DynamoDB
  # CLI flag: -table-manager.chunk-table.read-throughput
  [provisioned_read_throughput: <int> | default = 300]

  write_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.chunk-table.write-throughput.scale.target-value
    [target: <float> | default = 80]

  read_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.chunk-table.read-throughput.scale.target-value
    [target: <float> | default = 80]

  # Enables on demand throughput provisioning for the storage provider (if
  # supported). Applies only to tables which are not autoscaled. Supported by
  # DynamoDB
  # CLI flag: -table-manager.chunk-table.inactive-enable-ondemand-throughput-mode
  [enable_inactive_throughput_on_demand_mode: <boolean> | default = false]

  # Table write throughput for inactive tables. Supported by DynamoDB
  # CLI flag: -table-manager.chunk-table.inactive-write-throughput
  [inactive_write_throughput: <int> | default = 1]

  # Table read throughput for inactive tables. Supported by DynamoDB
  # CLI flag: -table-manager.chunk-table.inactive-read-throughput
  [inactive_read_throughput: <int> | default = 300]

  inactive_write_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale.target-value
    [target: <float> | default = 80]

  inactive_read_scale:
    # Should we enable autoscale for the table.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.enabled
    [enabled: <boolean> | default = false]

    # AWS AutoScaling role ARN
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.role-arn
    [role_arn: <string> | default = ""]

    # DynamoDB minimum provision capacity.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.min-capacity
    [min_capacity: <int> | default = 3000]

    # DynamoDB maximum provision capacity.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.max-capacity
    [max_capacity: <int> | default = 6000]

    # DynamoDB minimum seconds between each autoscale up.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.out-cooldown
    [out_cooldown: <int> | default = 1800]

    # DynamoDB minimum seconds between each autoscale down.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.in-cooldown
    [in_cooldown: <int> | default = 1800]

    # DynamoDB target ratio of consumed capacity to provisioned capacity.
    # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale.target-value
    [target: <float> | default = 80]

  # Number of last inactive tables to enable write autoscale.
  # CLI flag: -table-manager.chunk-table.inactive-write-throughput.scale-last-n
  [inactive_write_scale_lastn: <int> | default = 4]

  # Number of last inactive tables to enable read autoscale.
  # CLI flag: -table-manager.chunk-table.inactive-read-throughput.scale-last-n
  [inactive_read_scale_lastn: <int> | default = 4]

# How often to check runtime config files.
# CLI flag: -runtime-config.reload-period
[period: <duration> | default = 10s]

# Comma separated list of yaml files with the configuration that can be updated
# at runtime. Runtime config files will be merged from left to right.
# CLI flag: -runtime-config.file
[file: <string> | default = ""]

# Set to false to disable tracing.
# CLI flag: -tracing.enabled
[enabled: <boolean> | default = true]

# Enable anonymous usage reporting.
# CLI flag: -reporting.enabled
[reporting_enabled: <boolean> | default = true]

[path_prefix: <string> | default = ""]

storage:
  # The s3_storage_config block configures the connection to Amazon S3 object
  # storage backend.
  # The CLI flags prefix for this block configuration is: common
  [s3: <s3_storage_config>]

  # The gcs_storage_config block configures the connection to Google Cloud
  # Storage object storage backend.
  # The CLI flags prefix for this block configuration is: common.storage
  [gcs: <gcs_storage_config>]

  # The azure_storage_config block configures the connection to Azure object
  # storage backend.
  # The CLI flags prefix for this block configuration is: common.storage
  [azure: <azure_storage_config>]

  # The alibabacloud_storage_config block configures the connection to Alibaba
  # Cloud Storage object storage backend.
  [alibabacloud: <alibabacloud_storage_config>]

  # The bos_storage_config block configures the connection to Baidu Object
  # Storage (BOS) object storage backend.
  # The CLI flags prefix for this block configuration is: common.storage
  [bos: <bos_storage_config>]

  # The swift_storage_config block configures the connection to OpenStack Object
  # Storage (Swift) object storage backend.
  # The CLI flags prefix for this block configuration is: common.storage
  [swift: <swift_storage_config>]

  filesystem:
    # Directory to store chunks in.
    # CLI flag: -common.storage.filesystem.chunk-directory
    [chunks_directory: <string> | default = ""]

    # Directory to store rules in.
    # CLI flag: -common.storage.filesystem.rules-directory
    [rules_directory: <string> | default = ""]

  hedging:
    # If set to a non-zero value a second request will be issued at the provided
    # duration. Default is 0 (disabled)
    # CLI flag: -common.storage.hedge-requests-at
    [at: <duration> | default = 0s]

    # The maximum of hedge requests allowed.
    # CLI flag: -common.storage.hedge-requests-up-to
    [up_to: <int> | default = 2]

    # The maximum of hedge requests allowed per seconds.
    # CLI flag: -common.storage.hedge-max-per-second
    [max_per_second: <int> | default = 5]

[persist_tokens: <boolean>]

[replication_factor: <int>]

ring:
  kvstore:
    # Backend storage to use for the ring. Supported values are: consul, etcd,
    # inmemory, memberlist, multi.
    # CLI flag: -common.storage.ring.store
    [store: <string> | default = "consul"]

    # The prefix for the keys in the store. Should end with a /.
    # CLI flag: -common.storage.ring.prefix
    [prefix: <string> | default = "collectors/"]

    # Configuration for a Consul client. Only applies if the selected kvstore is
    # consul.
    # The CLI flags prefix for this block configuration is: common.storage.ring
    [consul: <consul>]

    # Configuration for an ETCD v3 client. Only applies if the selected kvstore
    # is etcd.
    # The CLI flags prefix for this block configuration is: common.storage.ring
    [etcd: <etcd>]

    multi:
      # Primary backend storage used by multi-client.
      # CLI flag: -common.storage.ring.multi.primary
      [primary: <string> | default = ""]

      # Secondary backend storage used by multi-client.
      # CLI flag: -common.storage.ring.multi.secondary
      [secondary: <string> | default = ""]

      # Mirror writes to secondary store.
      # CLI flag: -common.storage.ring.multi.mirror-enabled
      [mirror_enabled: <boolean> | default = false]

      # Timeout for storing value to secondary store.
      # CLI flag: -common.storage.ring.multi.mirror-timeout
      [mirror_timeout: <duration> | default = 2s]

  # Period at which to heartbeat to the ring. 0 = disabled.
  # CLI flag: -common.storage.ring.heartbeat-period
  [heartbeat_period: <duration> | default = 15s]

  # The heartbeat timeout after which compactors are considered unhealthy within
  # the ring. 0 = never (timeout disabled).
  # CLI flag: -common.storage.ring.heartbeat-timeout
  [heartbeat_timeout: <duration> | default = 1m]

  # File path where tokens are stored. If empty, tokens are not stored at
  # shutdown and restored at startup.
  # CLI flag: -common.storage.ring.tokens-file-path
  [tokens_file_path: <string> | default = ""]

  # True to enable zone-awareness and replicate blocks across different
  # availability zones.
  # CLI flag: -common.storage.ring.zone-awareness-enabled
  [zone_awareness_enabled: <boolean> | default = false]

  # Instance ID to register in the ring.
  # CLI flag: -common.storage.ring.instance-id
  [instance_id: <string> | default = "<hostname>"]

  # Name of network interface to read address from.
  # CLI flag: -common.storage.ring.instance-interface-names
  [instance_interface_names: <list of strings> | default = [<private network interfaces>]]

  # Port to advertise in the ring (defaults to server.grpc-listen-port).
  # CLI flag: -common.storage.ring.instance-port
  [instance_port: <int> | default = 0]

  # IP address to advertise in the ring.
  # CLI flag: -common.storage.ring.instance-addr
  [instance_addr: <string> | default = ""]

  # The availability zone where this instance is running. Required if
  # zone-awareness is enabled.
  # CLI flag: -common.storage.ring.instance-availability-zone
  [instance_availability_zone: <string> | default = ""]

[instance_interface_names: <list of strings>]

[instance_addr: <string> | default = ""]

# the http address of the compactor in the form http://host:port
# CLI flag: -common.compactor-address
[compactor_address: <string> | default = ""]

# the grpc address of the compactor in the form host:port
# CLI flag: -common.compactor-grpc-address
[compactor_grpc_address: <string> | default = ""]

# Hostname and port of Consul.
# CLI flag: -<prefix>.consul.hostname
[host: <string> | default = "localhost:8500"]

# ACL Token used to interact with Consul.
# CLI flag: -<prefix>.consul.acl-token
[acl_token: <string> | default = ""]

# HTTP timeout when talking to Consul
# CLI flag: -<prefix>.consul.client-timeout
[http_client_timeout: <duration> | default = 20s]

# Enable consistent reads to Consul.
# CLI flag: -<prefix>.consul.consistent-reads
[consistent_reads: <boolean> | default = false]

# Rate limit when watching key or prefix in Consul, in requests per second. 0
# disables the rate limit.
# CLI flag: -<prefix>.consul.watch-rate-limit
[watch_rate_limit: <float> | default = 1]

# Burst size used in rate limit. Values less than 1 are treated as 1.
# CLI flag: -<prefix>.consul.watch-burst-size
[watch_burst_size: <int> | default = 1]

# Maximum duration to wait before retrying a Compare And Swap (CAS) operation.
# CLI flag: -<prefix>.consul.cas-retry-delay
[cas_retry_delay: <duration> | default = 1s]

# The etcd endpoints to connect to.
# CLI flag: -<prefix>.etcd.endpoints
[endpoints: <list of strings> | default = []]

# The dial timeout for the etcd connection.
# CLI flag: -<prefix>.etcd.dial-timeout
[dial_timeout: <duration> | default = 10s]

# The maximum number of retries to do for failed ops.
# CLI flag: -<prefix>.etcd.max-retries
[max_retries: <int> | default = 10]

# Enable TLS.
# CLI flag: -<prefix>.etcd.tls-enabled
[tls_enabled: <boolean> | default = false]

# Path to the client certificate file, which will be used for authenticating
# with the server. Also requires the key path to be configured.
# CLI flag: -<prefix>.etcd.tls-cert-path
[tls_cert_path: <string> | default = ""]

# Path to the key file for the client certificate. Also requires the client
# certificate to be configured.
# CLI flag: -<prefix>.etcd.tls-key-path
[tls_key_path: <string> | default = ""]

# Path to the CA certificates file to validate server certificate against. If
# not set, the host's root CA certificates are used.
# CLI flag: -<prefix>.etcd.tls-ca-path
[tls_ca_path: <string> | default = ""]

# Override the expected name on the server certificate.
# CLI flag: -<prefix>.etcd.tls-server-name
[tls_server_name: <string> | default = ""]

# Skip validating server certificate.
# CLI flag: -<prefix>.etcd.tls-insecure-skip-verify
[tls_insecure_skip_verify: <boolean> | default = false]

# Override the default cipher suite list (separated by commas). Allowed values:
# 
# Secure Ciphers:
# - TLS_RSA_WITH_AES_128_CBC_SHA
# - TLS_RSA_WITH_AES_256_CBC_SHA
# - TLS_RSA_WITH_AES_128_GCM_SHA256
# - TLS_RSA_WITH_AES_256_GCM_SHA384
# - TLS_AES_128_GCM_SHA256
# - TLS_AES_256_GCM_SHA384
# - TLS_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
# 
# Insecure Ciphers:
# - TLS_RSA_WITH_RC4_128_SHA
# - TLS_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_RSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
# CLI flag: -<prefix>.etcd.tls-cipher-suites
[tls_cipher_suites: <string> | default = ""]

# Override the default minimum TLS version. Allowed values: VersionTLS10,
# VersionTLS11, VersionTLS12, VersionTLS13
# CLI flag: -<prefix>.etcd.tls-min-version
[tls_min_version: <string> | default = ""]

# Etcd username.
# CLI flag: -<prefix>.etcd.username
[username: <string> | default = ""]

# Etcd password.
# CLI flag: -<prefix>.etcd.password
[password: <string> | default = ""]

# Name of the node in memberlist cluster. Defaults to hostname.
# CLI flag: -memberlist.nodename
[node_name: <string> | default = ""]

# Add random suffix to the node name.
# CLI flag: -memberlist.randomize-node-name
[randomize_node_name: <boolean> | default = true]

# The timeout for establishing a connection with a remote node, and for
# read/write operations.
# CLI flag: -memberlist.stream-timeout
[stream_timeout: <duration> | default = 10s]

# Multiplication factor used when sending out messages (factor * log(N+1)).
# CLI flag: -memberlist.retransmit-factor
[retransmit_factor: <int> | default = 4]

# How often to use pull/push sync.
# CLI flag: -memberlist.pullpush-interval
[pull_push_interval: <duration> | default = 30s]

# How often to gossip.
# CLI flag: -memberlist.gossip-interval
[gossip_interval: <duration> | default = 200ms]

# How many nodes to gossip to.
# CLI flag: -memberlist.gossip-nodes
[gossip_nodes: <int> | default = 3]

# How long to keep gossiping to dead nodes, to give them chance to refute their
# death.
# CLI flag: -memberlist.gossip-to-dead-nodes-time
[gossip_to_dead_nodes_time: <duration> | default = 30s]

# How soon can dead node's name be reclaimed with new address. 0 to disable.
# CLI flag: -memberlist.dead-node-reclaim-time
[dead_node_reclaim_time: <duration> | default = 0s]

# Enable message compression. This can be used to reduce bandwidth usage at the
# cost of slightly more CPU utilization.
# CLI flag: -memberlist.compression-enabled
[compression_enabled: <boolean> | default = true]

# Gossip address to advertise to other members in the cluster. Used for NAT
# traversal.
# CLI flag: -memberlist.advertise-addr
[advertise_addr: <string> | default = ""]

# Gossip port to advertise to other members in the cluster. Used for NAT
# traversal.
# CLI flag: -memberlist.advertise-port
[advertise_port: <int> | default = 7946]

# The cluster label is an optional string to include in outbound packets and
# gossip streams. Other members in the memberlist cluster will discard any
# message whose label doesn't match the configured one, unless the
# 'cluster-label-verification-disabled' configuration option is set to true.
# CLI flag: -memberlist.cluster-label
[cluster_label: <string> | default = ""]

# When true, memberlist doesn't verify that inbound packets and gossip streams
# have the cluster label matching the configured one. This verification should
# be disabled while rolling out the change to the configured cluster label in a
# live memberlist cluster.
# CLI flag: -memberlist.cluster-label-verification-disabled
[cluster_label_verification_disabled: <boolean> | default = false]

# Other cluster members to join. Can be specified multiple times. It can be an
# IP, hostname or an entry specified in the DNS Service Discovery format.
# CLI flag: -memberlist.join
[join_members: <list of strings> | default = []]

# Min backoff duration to join other cluster members.
# CLI flag: -memberlist.min-join-backoff
[min_join_backoff: <duration> | default = 1s]

# Max backoff duration to join other cluster members.
# CLI flag: -memberlist.max-join-backoff
[max_join_backoff: <duration> | default = 1m]

# Max number of retries to join other cluster members.
# CLI flag: -memberlist.max-join-retries
[max_join_retries: <int> | default = 10]

# If this node fails to join memberlist cluster, abort.
# CLI flag: -memberlist.abort-if-join-fails
[abort_if_cluster_join_fails: <boolean> | default = false]

# If not 0, how often to rejoin the cluster. Occasional rejoin can help to fix
# the cluster split issue, and is harmless otherwise. For example when using
# only few components as a seed nodes (via -memberlist.join), then it's
# recommended to use rejoin. If -memberlist.join points to dynamic service that
# resolves to all gossiping nodes (eg. Kubernetes headless service), then rejoin
# is not needed.
# CLI flag: -memberlist.rejoin-interval
[rejoin_interval: <duration> | default = 0s]

# How long to keep LEFT ingesters in the ring.
# CLI flag: -memberlist.left-ingesters-timeout
[left_ingesters_timeout: <duration> | default = 5m]

# Timeout for leaving memberlist cluster.
# CLI flag: -memberlist.leave-timeout
[leave_timeout: <duration> | default = 20s]

# How much space to use for keeping received and sent messages in memory for
# troubleshooting (two buffers). 0 to disable.
# CLI flag: -memberlist.message-history-buffer-bytes
[message_history_buffer_bytes: <int> | default = 0]

# IP address to listen on for gossip messages. Multiple addresses may be
# specified. Defaults to 0.0.0.0
# CLI flag: -memberlist.bind-addr
[bind_addr: <list of strings> | default = []]

# Port to listen on for gossip messages.
# CLI flag: -memberlist.bind-port
[bind_port: <int> | default = 7946]

# Timeout used when connecting to other nodes to send packet.
# CLI flag: -memberlist.packet-dial-timeout
[packet_dial_timeout: <duration> | default = 2s]

# Timeout for writing 'packet' data.
# CLI flag: -memberlist.packet-write-timeout
[packet_write_timeout: <duration> | default = 5s]

# Enable TLS on the memberlist transport layer.
# CLI flag: -memberlist.tls-enabled
[tls_enabled: <boolean> | default = false]

# Path to the client certificate file, which will be used for authenticating
# with the server. Also requires the key path to be configured.
# CLI flag: -memberlist.tls-cert-path
[tls_cert_path: <string> | default = ""]

# Path to the key file for the client certificate. Also requires the client
# certificate to be configured.
# CLI flag: -memberlist.tls-key-path
[tls_key_path: <string> | default = ""]

# Path to the CA certificates file to validate server certificate against. If
# not set, the host's root CA certificates are used.
# CLI flag: -memberlist.tls-ca-path
[tls_ca_path: <string> | default = ""]

# Override the expected name on the server certificate.
# CLI flag: -memberlist.tls-server-name
[tls_server_name: <string> | default = ""]

# Skip validating server certificate.
# CLI flag: -memberlist.tls-insecure-skip-verify
[tls_insecure_skip_verify: <boolean> | default = false]

# Override the default cipher suite list (separated by commas). Allowed values:
# 
# Secure Ciphers:
# - TLS_RSA_WITH_AES_128_CBC_SHA
# - TLS_RSA_WITH_AES_256_CBC_SHA
# - TLS_RSA_WITH_AES_128_GCM_SHA256
# - TLS_RSA_WITH_AES_256_GCM_SHA384
# - TLS_AES_128_GCM_SHA256
# - TLS_AES_256_GCM_SHA384
# - TLS_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
# 
# Insecure Ciphers:
# - TLS_RSA_WITH_RC4_128_SHA
# - TLS_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_RSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
# CLI flag: -memberlist.tls-cipher-suites
[tls_cipher_suites: <string> | default = ""]

# Override the default minimum TLS version. Allowed values: VersionTLS10,
# VersionTLS11, VersionTLS12, VersionTLS13
# CLI flag: -memberlist.tls-min-version
[tls_min_version: <string> | default = ""]

# gRPC client max receive message size (bytes).
# CLI flag: -<prefix>.grpc-max-recv-msg-size
[max_recv_msg_size: <int> | default = 104857600]

# gRPC client max send message size (bytes).
# CLI flag: -<prefix>.grpc-max-send-msg-size
[max_send_msg_size: <int> | default = 104857600]

# Use compression when sending messages. Supported values are: 'gzip', 'snappy'
# and '' (disable compression)
# CLI flag: -<prefix>.grpc-compression
[grpc_compression: <string> | default = ""]

# Rate limit for gRPC client; 0 means disabled.
# CLI flag: -<prefix>.grpc-client-rate-limit
[rate_limit: <float> | default = 0]

# Rate limit burst for gRPC client.
# CLI flag: -<prefix>.grpc-client-rate-limit-burst
[rate_limit_burst: <int> | default = 0]

# Enable backoff and retry when we hit ratelimits.
# CLI flag: -<prefix>.backoff-on-ratelimits
[backoff_on_ratelimits: <boolean> | default = false]

backoff_config:
  # Minimum delay when backing off.
  # CLI flag: -<prefix>.backoff-min-period
  [min_period: <duration> | default = 100ms]

  # Maximum delay when backing off.
  # CLI flag: -<prefix>.backoff-max-period
  [max_period: <duration> | default = 10s]

  # Number of times to backoff and retry before failing.
  # CLI flag: -<prefix>.backoff-retries
  [max_retries: <int> | default = 10]

# Enable TLS in the GRPC client. This flag needs to be enabled when any other
# TLS flag is set. If set to false, insecure connection to gRPC server will be
# used.
# CLI flag: -<prefix>.tls-enabled
[tls_enabled: <boolean> | default = false]

# Path to the client certificate file, which will be used for authenticating
# with the server. Also requires the key path to be configured.
# CLI flag: -<prefix>.tls-cert-path
[tls_cert_path: <string> | default = ""]

# Path to the key file for the client certificate. Also requires the client
# certificate to be configured.
# CLI flag: -<prefix>.tls-key-path
[tls_key_path: <string> | default = ""]

# Path to the CA certificates file to validate server certificate against. If
# not set, the host's root CA certificates are used.
# CLI flag: -<prefix>.tls-ca-path
[tls_ca_path: <string> | default = ""]

# Override the expected name on the server certificate.
# CLI flag: -<prefix>.tls-server-name
[tls_server_name: <string> | default = ""]

# Skip validating server certificate.
# CLI flag: -<prefix>.tls-insecure-skip-verify
[tls_insecure_skip_verify: <boolean> | default = false]

# Override the default cipher suite list (separated by commas). Allowed values:
# 
# Secure Ciphers:
# - TLS_RSA_WITH_AES_128_CBC_SHA
# - TLS_RSA_WITH_AES_256_CBC_SHA
# - TLS_RSA_WITH_AES_128_GCM_SHA256
# - TLS_RSA_WITH_AES_256_GCM_SHA384
# - TLS_AES_128_GCM_SHA256
# - TLS_AES_256_GCM_SHA384
# - TLS_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
# 
# Insecure Ciphers:
# - TLS_RSA_WITH_RC4_128_SHA
# - TLS_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_RSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
# CLI flag: -<prefix>.tls-cipher-suites
[tls_cipher_suites: <string> | default = ""]

# Override the default minimum TLS version. Allowed values: VersionTLS10,
# VersionTLS11, VersionTLS12, VersionTLS13
# CLI flag: -<prefix>.tls-min-version
[tls_min_version: <string> | default = ""]

# Path to the client certificate file, which will be used for authenticating
# with the server. Also requires the key path to be configured.
# CLI flag: -frontend.tail-tls-config.tls-cert-path
[tls_cert_path: <string> | default = ""]

# Path to the key file for the client certificate. Also requires the client
# certificate to be configured.
# CLI flag: -frontend.tail-tls-config.tls-key-path
[tls_key_path: <string> | default = ""]

# Path to the CA certificates file to validate server certificate against. If
# not set, the host's root CA certificates are used.
# CLI flag: -frontend.tail-tls-config.tls-ca-path
[tls_ca_path: <string> | default = ""]

# Override the expected name on the server certificate.
# CLI flag: -frontend.tail-tls-config.tls-server-name
[tls_server_name: <string> | default = ""]

# Skip validating server certificate.
# CLI flag: -frontend.tail-tls-config.tls-insecure-skip-verify
[tls_insecure_skip_verify: <boolean> | default = false]

# Override the default cipher suite list (separated by commas). Allowed values:
# 
# Secure Ciphers:
# - TLS_RSA_WITH_AES_128_CBC_SHA
# - TLS_RSA_WITH_AES_256_CBC_SHA
# - TLS_RSA_WITH_AES_128_GCM_SHA256
# - TLS_RSA_WITH_AES_256_GCM_SHA384
# - TLS_AES_128_GCM_SHA256
# - TLS_AES_256_GCM_SHA384
# - TLS_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
# - TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# - TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
# - TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
# - TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
# 
# Insecure Ciphers:
# - TLS_RSA_WITH_RC4_128_SHA
# - TLS_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_RSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_RC4_128_SHA
# - TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
# - TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
# - TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
# CLI flag: -frontend.tail-tls-config.tls-cipher-suites
[tls_cipher_suites: <string> | default = ""]

# Override the default minimum TLS version. Allowed values: VersionTLS10,
# VersionTLS11, VersionTLS12, VersionTLS13
# CLI flag: -frontend.tail-tls-config.tls-min-version
[tls_min_version: <string> | default = ""]

# (deprecated: use embedded-cache instead) Enable in-memory cache (auto-enabled
# for the chunks & query results cache if no other cache is configured).
# CLI flag: -<prefix>.cache.enable-fifocache
[enable_fifocache: <boolean> | default = false]

# The default validity of entries for caches unless overridden.
# CLI flag: -<prefix>.default-validity
[default_validity: <duration> | default = 1h]

background:
  # At what concurrency to write back to cache.
  # CLI flag: -<prefix>.background.write-back-concurrency
  [writeback_goroutines: <int> | default = 10]

  # How many key batches to buffer for background write-back.
  # CLI flag: -<prefix>.background.write-back-buffer
  [writeback_buffer: <int> | default = 10000]

  # Size limit in bytes for background write-back.
  # CLI flag: -<prefix>.background.write-back-size-limit
  [writeback_size_limit: <int> | default = 1GB]

memcached:
  # How long keys stay in the memcache.
  # CLI flag: -<prefix>.memcached.expiration
  [expiration: <duration> | default = 0s]

  # How many keys to fetch in each batch.
  # CLI flag: -<prefix>.memcached.batchsize
  [batch_size: <int> | default = 1024]

  # Maximum active requests to memcache.
  # CLI flag: -<prefix>.memcached.parallelism
  [parallelism: <int> | default = 100]

memcached_client:
  # Hostname for memcached service to use. If empty and if addresses is unset,
  # no memcached will be used.
  # CLI flag: -<prefix>.memcached.hostname
  [host: <string> | default = ""]

  # SRV service used to discover memcache servers.
  # CLI flag: -<prefix>.memcached.service
  [service: <string> | default = "memcached"]

  # EXPERIMENTAL: Comma separated addresses list in DNS Service Discovery
  # format:
  # https://cortexmetrics.io/docs/configuration/arguments/#dns-service-discovery
  # CLI flag: -<prefix>.memcached.addresses
  [addresses: <string> | default = ""]

  # Maximum time to wait before giving up on memcached requests.
  # CLI flag: -<prefix>.memcached.timeout
  [timeout: <duration> | default = 100ms]

  # Maximum number of idle connections in pool.
  # CLI flag: -<prefix>.memcached.max-idle-conns
  [max_idle_conns: <int> | default = 16]

  # The maximum size of an item stored in memcached. Bigger items are not
  # stored. If set to 0, no maximum size is enforced.
  # CLI flag: -<prefix>.memcached.max-item-size
  [max_item_size: <int> | default = 0]

  # Period with which to poll DNS for memcache servers.
  # CLI flag: -<prefix>.memcached.update-interval
  [update_interval: <duration> | default = 1m]

  # Use consistent hashing to distribute to memcache servers.
  # CLI flag: -<prefix>.memcached.consistent-hash
  [consistent_hash: <boolean> | default = true]

  # Trip circuit-breaker after this number of consecutive dial failures (if zero
  # then circuit-breaker is disabled).
  # CLI flag: -<prefix>.memcached.circuit-breaker-consecutive-failures
  [circuit_breaker_consecutive_failures: <int> | default = 10]

  # Duration circuit-breaker remains open after tripping (if zero then 60
  # seconds is used).
  # CLI flag: -<prefix>.memcached.circuit-breaker-timeout
  [circuit_breaker_timeout: <duration> | default = 10s]

  # Reset circuit-breaker counts after this long (if zero then never reset).
  # CLI flag: -<prefix>.memcached.circuit-breaker-interval
  [circuit_breaker_interval: <duration> | default = 10s]

redis:
  # Redis Server or Cluster configuration endpoint to use for caching. A
  # comma-separated list of endpoints for Redis Cluster or Redis Sentinel. If
  # empty, no redis will be used.
  # CLI flag: -<prefix>.redis.endpoint
  [endpoint: <string> | default = ""]

  # Redis Sentinel master name. An empty string for Redis Server or Redis
  # Cluster.
  # CLI flag: -<prefix>.redis.master-name
  [master_name: <string> | default = ""]

  # Maximum time to wait before giving up on redis requests.
  # CLI flag: -<prefix>.redis.timeout
  [timeout: <duration> | default = 500ms]

  # How long keys stay in the redis.
  # CLI flag: -<prefix>.redis.expiration
  [expiration: <duration> | default = 0s]

  # Database index.
  # CLI flag: -<prefix>.redis.db
  [db: <int> | default = 0]

  # Maximum number of connections in the pool.
  # CLI flag: -<prefix>.redis.pool-size
  [pool_size: <int> | default = 0]

  # Username to use when connecting to redis.
  # CLI flag: -<prefix>.redis.username
  [username: <string> | default = ""]

  # Password to use when connecting to redis.
  # CLI flag: -<prefix>.redis.password
  [password: <string> | default = ""]

  # Enable connecting to redis with TLS.
  # CLI flag: -<prefix>.redis.tls-enabled
  [tls_enabled: <boolean> | default = false]

  # Skip validating server certificate.
  # CLI flag: -<prefix>.redis.tls-insecure-skip-verify
  [tls_insecure_skip_verify: <boolean> | default = false]

  # Close connections after remaining idle for this duration. If the value is
  # zero, then idle connections are not closed.
  # CLI flag: -<prefix>.redis.idle-timeout
  [idle_timeout: <duration> | default = 0s]

  # Close connections older than this duration. If the value is zero, then the
  # pool does not close connections based on age.
  # CLI flag: -<prefix>.redis.max-connection-age
  [max_connection_age: <duration> | default = 0s]

embedded_cache:
  # Whether embedded cache is enabled.
  # CLI flag: -<prefix>.embedded-cache.enabled
  [enabled: <boolean> | default = false]

  # Maximum memory size of the cache in MB.
  # CLI flag: -<prefix>.embedded-cache.max-size-mb
  [max_size_mb: <int> | default = 100]

  # The time to live for items in the cache before they get purged.
  # CLI flag: -<prefix>.embedded-cache.ttl
  [ttl: <duration> | default = 1h]

fifocache:
  # Maximum memory size of the cache in bytes. A unit suffix (KB, MB, GB) may be
  # applied.
  # CLI flag: -<prefix>.fifocache.max-size-bytes
  [max_size_bytes: <string> | default = "1GB"]

  # deprecated: Maximum number of entries in the cache.
  # CLI flag: -<prefix>.fifocache.max-size-items
  [max_size_items: <int> | default = 0]

  # The time to live for items in the cache before they get purged.
  # CLI flag: -<prefix>.fifocache.ttl
  [ttl: <duration> | default = 1h]

  # Deprecated (use ttl instead): The expiry duration for the cache.
  # CLI flag: -<prefix>.fifocache.duration
  [validity: <duration> | default = 0s]

  # Deprecated (use max-size-items or max-size-bytes instead): The number of
  # entries to cache.
  # CLI flag: -<prefix>.fifocache.size
  [size: <int> | default = 0]

  [purgeinterval: <duration>]

# The maximum number of concurrent asynchronous writeback cache can occur.
# CLI flag: -<prefix>.max-async-cache-write-back-concurrency
[async_cache_write_back_concurrency: <int> | default = 16]

# The maximum number of enqueued asynchronous writeback cache allowed.
# CLI flag: -<prefix>.max-async-cache-write-back-buffer-size
[async_cache_write_back_buffer_size: <int> | default = 500]

# The date of the first day that index buckets should be created. Use a date in
# the past if this is your only period_config, otherwise use a date when you
# want the schema to switch over. In YYYY-MM-DD format, for example: 2018-04-15.
[from: <daytime>]

# store and object_store below affect which <storage_config> key is used.
# Which store to use for the index. Either aws, aws-dynamo, gcp, bigtable,
# bigtable-hashed, cassandra, boltdb or boltdb-shipper.
[store: <string> | default = ""]

# Which store to use for the chunks. Either aws, azure, gcp, bigtable, gcs,
# cassandra, swift, filesystem or a named_store (refer to named_stores_config).
# If omitted, defaults to the same value as store.
[object_store: <string> | default = ""]

# The schema version to use, current recommended schema is v11.
[schema: <string> | default = ""]

# Configures how the index is updated and stored.
index:
  # Table prefix for all period tables.
  [prefix: <string> | default = ""]

  # Table period.
  [period: <duration>]

  # A map to be added to all managed tables.
  [tags: <map of string to string>]

# Configured how the chunks are updated and stored.
chunks:
  # Table prefix for all period tables.
  [prefix: <string> | default = ""]

  # Table period.
  [period: <duration>]

  # A map to be added to all managed tables.
  [tags: <map of string to string>]

# How many shards will be created. Only used if schema is v10 or greater.
[row_shards: <int>]

dynamodb:
  # DynamoDB endpoint URL with escaped Key and Secret encoded. If only region is
  # specified as a host, proper endpoint will be deduced. Use
  # inmemory:///<table-name> to use a mock in-memory implementation.
  # CLI flag: -dynamodb.url
  [dynamodb_url: <url>]

  # DynamoDB table management requests per second limit.
  # CLI flag: -dynamodb.api-limit
  [api_limit: <float> | default = 2]

  # DynamoDB rate cap to back off when throttled.
  # CLI flag: -dynamodb.throttle-limit
  [throttle_limit: <float> | default = 10]

  metrics:
    # Use metrics-based autoscaling, via this query URL
    # CLI flag: -metrics.url
    [url: <string> | default = ""]

    # Queue length above which we will scale up capacity
    # CLI flag: -metrics.target-queue-length
    [target_queue_length: <int> | default = 100000]

    # Scale up capacity by this multiple
    # CLI flag: -metrics.scale-up-factor
    [scale_up_factor: <float> | default = 1.3]

    # Ignore throttling below this level (rate per second)
    # CLI flag: -metrics.ignore-throttle-below
    [ignore_throttle_below: <float> | default = 1]

    # query to fetch ingester queue length
    # CLI flag: -metrics.queue-length-query
    [queue_length_query: <string> | default = "sum(avg_over_time(cortex_ingester_flush_queue_length{job=\"cortex/ingester\"}[2m]))"]

    # query to fetch throttle rates per table
    # CLI flag: -metrics.write-throttle-query
    [write_throttle_query: <string> | default = "sum(rate(cortex_dynamo_throttled_total{operation=\"DynamoDB.BatchWriteItem\"}[1m])) by (table) > 0"]

    # query to fetch write capacity usage per table
    # CLI flag: -metrics.usage-query
    [write_usage_query: <string> | default = "sum(rate(cortex_dynamo_consumed_capacity_total{operation=\"DynamoDB.BatchWriteItem\"}[15m])) by (table) > 0"]

    # query to fetch read capacity usage per table
    # CLI flag: -metrics.read-usage-query
    [read_usage_query: <string> | default = "sum(rate(cortex_dynamo_consumed_capacity_total{operation=\"DynamoDB.QueryPages\"}[1h])) by (table) > 0"]

    # query to fetch read errors per table
    # CLI flag: -metrics.read-error-query
    [read_error_query: <string> | default = "sum(increase(cortex_dynamo_failures_total{operation=\"DynamoDB.QueryPages\",error=\"ProvisionedThroughputExceededException\"}[1m])) by (table) > 0"]

  # Number of chunks to group together to parallelise fetches (zero to disable)
  # CLI flag: -dynamodb.chunk-gang-size
  [chunk_gang_size: <int> | default = 10]

  # Max number of chunk-get operations to start in parallel
  # CLI flag: -dynamodb.chunk.get-max-parallelism
  [chunk_get_max_parallelism: <int> | default = 32]

  backoff_config:
    # Minimum backoff time
    # CLI flag: -dynamodb.min-backoff
    [min_period: <duration> | default = 100ms]

    # Maximum backoff time
    # CLI flag: -dynamodb.max-backoff
    [max_period: <duration> | default = 50s]

    # Maximum number of times to retry an operation
    # CLI flag: -dynamodb.max-retries
    [max_retries: <int> | default = 20]

  # KMS key used for encrypting DynamoDB items.  DynamoDB will use an Amazon
  # owned KMS key if not provided.
  # CLI flag: -dynamodb.kms-key-id
  [kms_key_id: <string> | default = ""]

# S3 endpoint URL with escaped Key and Secret encoded. If only region is
# specified as a host, proper endpoint will be deduced. Use
# inmemory:///<bucket-name> to use a mock in-memory implementation.
# CLI flag: -s3.url
[s3: <url>]

# Set this to `true` to force the request to use path-style addressing.
# CLI flag: -s3.force-path-style
[s3forcepathstyle: <boolean> | default = false]

# Comma separated list of bucket names to evenly distribute chunks over.
# Overrides any buckets specified in s3.url flag
# CLI flag: -s3.buckets
[bucketnames: <string> | default = ""]

# S3 Endpoint to connect to.
# CLI flag: -s3.endpoint
[endpoint: <string> | default = ""]

# AWS region to use.
# CLI flag: -s3.region
[region: <string> | default = ""]

# AWS Access Key ID
# CLI flag: -s3.access-key-id
[access_key_id: <string> | default = ""]

# AWS Secret Access Key
# CLI flag: -s3.secret-access-key
[secret_access_key: <string> | default = ""]

# AWS Session Token
# CLI flag: -s3.session-token
[session_token: <string> | default = ""]

# Disable https on s3 connection.
# CLI flag: -s3.insecure
[insecure: <boolean> | default = false]

# Enable AWS Server Side Encryption [Deprecated: Use .sse instead. if
# s3.sse-encryption is enabled, it assumes .sse.type SSE-S3]
# CLI flag: -s3.sse-encryption
[sse_encryption: <boolean> | default = false]

http_config:
  # The maximum amount of time an idle connection will be held open.
  # CLI flag: -s3.http.idle-conn-timeout
  [idle_conn_timeout: <duration> | default = 1m30s]

  # If non-zero, specifies the amount of time to wait for a server's response
  # headers after fully writing the request.
  # CLI flag: -s3.http.response-header-timeout
  [response_header_timeout: <duration> | default = 0s]

  # Set to true to skip verifying the certificate chain and hostname.
  # CLI flag: -s3.http.insecure-skip-verify
  [insecure_skip_verify: <boolean> | default = false]

  # Path to the trusted CA file that signed the SSL certificate of the S3
  # endpoint.
  # CLI flag: -s3.http.ca-file
  [ca_file: <string> | default = ""]

# The signature version to use for authenticating against S3. Supported values
# are: v4, v2.
# CLI flag: -s3.signature-version
[signature_version: <string> | default = "v4"]

# The S3 storage class which objects will use. Supported values are: GLACIER,
# DEEP_ARCHIVE, GLACIER_IR, INTELLIGENT_TIERING, ONEZONE_IA, OUTPOSTS,
# REDUCED_REDUNDANCY, STANDARD, STANDARD_IA.
# CLI flag: -s3.storage-class
[storage_class: <string> | default = "STANDARD"]

sse:
  # Enable AWS Server Side Encryption. Supported values: SSE-KMS, SSE-S3.
  # CLI flag: -s3.sse.type
  [type: <string> | default = ""]

  # KMS Key ID used to encrypt objects in S3
  # CLI flag: -s3.sse.kms-key-id
  [kms_key_id: <string> | default = ""]

  # KMS Encryption Context used for object encryption. It expects JSON formatted
  # string.
  # CLI flag: -s3.sse.kms-encryption-context
  [kms_encryption_context: <string> | default = ""]

# Configures back off when S3 get Object.
backoff_config:
  # Minimum backoff time when s3 get Object
  # CLI flag: -s3.min-backoff
  [min_period: <duration> | default = 100ms]

  # Maximum backoff time when s3 get Object
  # CLI flag: -s3.max-backoff
  [max_period: <duration> | default = 3s]

  # Maximum number of times to retry when s3 get Object
  # CLI flag: -s3.max-retries
  [max_retries: <int> | default = 5]

# Azure Cloud environment. Supported values are: AzureGlobal, AzureChinaCloud,
# AzureGermanCloud, AzureUSGovernment.
# CLI flag: -<prefix>.azure.environment
[environment: <string> | default = "AzureGlobal"]

# Azure storage account name.
# CLI flag: -<prefix>.azure.account-name
[account_name: <string> | default = ""]

# Azure storage account key.
# CLI flag: -<prefix>.azure.account-key
[account_key: <string> | default = ""]

# Name of the storage account blob container used to store chunks. This
# container must be created before running cortex.
# CLI flag: -<prefix>.azure.container-name
[container_name: <string> | default = "loki"]

# Azure storage endpoint suffix without schema. The storage account name will be
# prefixed to this value to create the FQDN.
# CLI flag: -<prefix>.azure.endpoint-suffix
[endpoint_suffix: <string> | default = ""]

# Use Managed Identity to authenticate to the Azure storage account.
# CLI flag: -<prefix>.azure.use-managed-identity
[use_managed_identity: <boolean> | default = false]

# Use Federated Token to authenticate to the Azure storage account.
# CLI flag: -<prefix>.azure.use-federated-token
[use_federated_token: <boolean> | default = false]

# User assigned identity ID to authenticate to the Azure storage account.
# CLI flag: -<prefix>.azure.user-assigned-id
[user_assigned_id: <string> | default = ""]

# Use Service Principal to authenticate through Azure OAuth.
# CLI flag: -<prefix>.azure.use-service-principal
[use_service_principal: <boolean> | default = false]

# Azure Service Principal ID(GUID).
# CLI flag: -<prefix>.azure.client-id
[client_id: <string> | default = ""]

# Azure Service Principal secret key.
# CLI flag: -<prefix>.azure.client-secret
[client_secret: <string> | default = ""]

# Azure Tenant ID is used to authenticate through Azure OAuth.
# CLI flag: -<prefix>.azure.tenant-id
[tenant_id: <string> | default = ""]

# Chunk delimiter for blob ID to be used
# CLI flag: -<prefix>.azure.chunk-delimiter
[chunk_delimiter: <string> | default = "-"]

# Preallocated buffer size for downloads.
# CLI flag: -<prefix>.azure.download-buffer-size
[download_buffer_size: <int> | default = 512000]

# Preallocated buffer size for uploads.
# CLI flag: -<prefix>.azure.upload-buffer-size
[upload_buffer_size: <int> | default = 256000]

# Number of buffers used to used to upload a chunk.
# CLI flag: -<prefix>.azure.download-buffer-count
[upload_buffer_count: <int> | default = 1]

# Timeout for requests made against azure blob storage.
# CLI flag: -<prefix>.azure.request-timeout
[request_timeout: <duration> | default = 30s]

# Number of retries for a request which times out.
# CLI flag: -<prefix>.azure.max-retries
[max_retries: <int> | default = 5]

# Minimum time to wait before retrying a request.
# CLI flag: -<prefix>.azure.min-retry-delay
[min_retry_delay: <duration> | default = 10ms]

# Maximum time to wait before retrying a request.
# CLI flag: -<prefix>.azure.max-retry-delay
[max_retry_delay: <duration> | default = 500ms]

# Name of OSS bucket.
# CLI flag: -common.storage.oss.bucketname
[bucket: <string> | default = ""]

# oss Endpoint to connect to.
# CLI flag: -common.storage.oss.endpoint
[endpoint: <string> | default = ""]

# alibabacloud Access Key ID
# CLI flag: -common.storage.oss.access-key-id
[access_key_id: <string> | default = ""]

# alibabacloud Secret Access Key
# CLI flag: -common.storage.oss.secret-access-key
[secret_access_key: <string> | default = ""]

# Name of GCS bucket. Please refer to
# https://cloud.google.com/docs/authentication/production for more information
# about how to configure authentication.
# CLI flag: -<prefix>.gcs.bucketname
[bucket_name: <string> | default = ""]

# Service account key content in JSON format, refer to
# https://cloud.google.com/iam/docs/creating-managing-service-account-keys for
# creation.
# CLI flag: -<prefix>.gcs.service-account
[service_account: <string> | default = ""]

# The size of the buffer that GCS client for each PUT request. 0 to disable
# buffering.
# CLI flag: -<prefix>.gcs.chunk-buffer-size
[chunk_buffer_size: <int> | default = 0]

# The duration after which the requests to GCS should be timed out.
# CLI flag: -<prefix>.gcs.request-timeout
[request_timeout: <duration> | default = 0s]

# Enable OpenCensus (OC) instrumentation for all requests.
# CLI flag: -<prefix>.gcs.enable-opencensus
[enable_opencensus: <boolean> | default = true]

# Enable HTTP2 connections.
# CLI flag: -<prefix>.gcs.enable-http2
[enable_http2: <boolean> | default = true]

# S3 endpoint URL with escaped Key and Secret encoded. If only region is
# specified as a host, proper endpoint will be deduced. Use
# inmemory:///<bucket-name> to use a mock in-memory implementation.
# CLI flag: -<prefix>.storage.s3.url
[s3: <url>]

# Set this to `true` to force the request to use path-style addressing.
# CLI flag: -<prefix>.storage.s3.force-path-style
[s3forcepathstyle: <boolean> | default = false]

# Comma separated list of bucket names to evenly distribute chunks over.
# Overrides any buckets specified in s3.url flag
# CLI flag: -<prefix>.storage.s3.buckets
[bucketnames: <string> | default = ""]

# S3 Endpoint to connect to.
# CLI flag: -<prefix>.storage.s3.endpoint
[endpoint: <string> | default = ""]

# AWS region to use.
# CLI flag: -<prefix>.storage.s3.region
[region: <string> | default = ""]

# AWS Access Key ID
# CLI flag: -<prefix>.storage.s3.access-key-id
[access_key_id: <string> | default = ""]

# AWS Secret Access Key
# CLI flag: -<prefix>.storage.s3.secret-access-key
[secret_access_key: <string> | default = ""]

# AWS Session Token
# CLI flag: -<prefix>.storage.s3.session-token
[session_token: <string> | default = ""]

# Disable https on s3 connection.
# CLI flag: -<prefix>.storage.s3.insecure
[insecure: <boolean> | default = false]

# Enable AWS Server Side Encryption [Deprecated: Use .sse instead. if
# s3.sse-encryption is enabled, it assumes .sse.type SSE-S3]
# CLI flag: -<prefix>.storage.s3.sse-encryption
[sse_encryption: <boolean> | default = false]

http_config:
  # The maximum amount of time an idle connection will be held open.
  # CLI flag: -<prefix>.storage.s3.http.idle-conn-timeout
  [idle_conn_timeout: <duration> | default = 1m30s]

  # If non-zero, specifies the amount of time to wait for a server's response
  # headers after fully writing the request.
  # CLI flag: -<prefix>.storage.s3.http.response-header-timeout
  [response_header_timeout: <duration> | default = 0s]

  # Set to true to skip verifying the certificate chain and hostname.
  # CLI flag: -<prefix>.storage.s3.http.insecure-skip-verify
  [insecure_skip_verify: <boolean> | default = false]

  # Path to the trusted CA file that signed the SSL certificate of the S3
  # endpoint.
  # CLI flag: -<prefix>.storage.s3.http.ca-file
  [ca_file: <string> | default = ""]

# The signature version to use for authenticating against S3. Supported values
# are: v4, v2.
# CLI flag: -<prefix>.storage.s3.signature-version
[signature_version: <string> | default = "v4"]

# The S3 storage class which objects will use. Supported values are: GLACIER,
# DEEP_ARCHIVE, GLACIER_IR, INTELLIGENT_TIERING, ONEZONE_IA, OUTPOSTS,
# REDUCED_REDUNDANCY, STANDARD, STANDARD_IA.
# CLI flag: -<prefix>.storage.s3.storage-class
[storage_class: <string> | default = "STANDARD"]

sse:
  # Enable AWS Server Side Encryption. Supported values: SSE-KMS, SSE-S3.
  # CLI flag: -<prefix>.storage.s3.sse.type
  [type: <string> | default = ""]

  # KMS Key ID used to encrypt objects in S3
  # CLI flag: -<prefix>.storage.s3.sse.kms-key-id
  [kms_key_id: <string> | default = ""]

  # KMS Encryption Context used for object encryption. It expects JSON formatted
  # string.
  # CLI flag: -<prefix>.storage.s3.sse.kms-encryption-context
  [kms_encryption_context: <string> | default = ""]

# Configures back off when S3 get Object.
backoff_config:
  # Minimum backoff time when s3 get Object
  # CLI flag: -<prefix>.storage.s3.min-backoff
  [min_period: <duration> | default = 100ms]

  # Maximum backoff time when s3 get Object
  # CLI flag: -<prefix>.storage.s3.max-backoff
  [max_period: <duration> | default = 3s]

  # Maximum number of times to retry when s3 get Object
  # CLI flag: -<prefix>.storage.s3.max-retries
  [max_retries: <int> | default = 5]

# Name of BOS bucket.
# CLI flag: -<prefix>.bos.bucket-name
[bucket_name: <string> | default = ""]

# BOS endpoint to connect to.
# CLI flag: -<prefix>.bos.endpoint
[endpoint: <string> | default = "bj.bcebos.com"]

# Baidu Cloud Engine (BCE) Access Key ID.
# CLI flag: -<prefix>.bos.access-key-id
[access_key_id: <string> | default = ""]

# Baidu Cloud Engine (BCE) Secret Access Key.
# CLI flag: -<prefix>.bos.secret-access-key
[secret_access_key: <string> | default = ""]

# OpenStack Swift authentication API version. 0 to autodetect.
# CLI flag: -<prefix>.swift.auth-version
[auth_version: <int> | default = 0]

# OpenStack Swift authentication URL
# CLI flag: -<prefix>.swift.auth-url
[auth_url: <string> | default = ""]

# Set this to true to use the internal OpenStack Swift endpoint URL
# CLI flag: -<prefix>.swift.internal
[internal: <boolean> | default = false]

# OpenStack Swift username.
# CLI flag: -<prefix>.swift.username
[username: <string> | default = ""]

# OpenStack Swift user's domain name.
# CLI flag: -<prefix>.swift.user-domain-name
[user_domain_name: <string> | default = ""]

# OpenStack Swift user's domain ID.
# CLI flag: -<prefix>.swift.user-domain-id
[user_domain_id: <string> | default = ""]

# OpenStack Swift user ID.
# CLI flag: -<prefix>.swift.user-id
[user_id: <string> | default = ""]

# OpenStack Swift API key.
# CLI flag: -<prefix>.swift.password
[password: <string> | default = ""]

# OpenStack Swift user's domain ID.
# CLI flag: -<prefix>.swift.domain-id
[domain_id: <string> | default = ""]

# OpenStack Swift user's domain name.
# CLI flag: -<prefix>.swift.domain-name
[domain_name: <string> | default = ""]

# OpenStack Swift project ID (v2,v3 auth only).
# CLI flag: -<prefix>.swift.project-id
[project_id: <string> | default = ""]

# OpenStack Swift project name (v2,v3 auth only).
# CLI flag: -<prefix>.swift.project-name
[project_name: <string> | default = ""]

# ID of the OpenStack Swift project's domain (v3 auth only), only needed if it
# differs the from user domain.
# CLI flag: -<prefix>.swift.project-domain-id
[project_domain_id: <string> | default = ""]

# Name of the OpenStack Swift project's domain (v3 auth only), only needed if it
# differs from the user domain.
# CLI flag: -<prefix>.swift.project-domain-name
[project_domain_name: <string> | default = ""]

# OpenStack Swift Region to use (v2,v3 auth only).
# CLI flag: -<prefix>.swift.region-name
[region_name: <string> | default = ""]

# Name of the OpenStack Swift container to put chunks in.
# CLI flag: -<prefix>.swift.container-name
[container_name: <string> | default = ""]

# Max retries on requests error.
# CLI flag: -<prefix>.swift.max-retries
[max_retries: <int> | default = 3]

# Time after which a connection attempt is aborted.
# CLI flag: -<prefix>.swift.connect-timeout
[connect_timeout: <duration> | default = 10s]

# Time after which an idle request is aborted. The timeout watchdog is reset
# each time some data is received, so the timeout triggers after X time no data
# is received on a request.
# CLI flag: -<prefix>.swift.request-timeout
[request_timeout: <duration> | default = 5s]

# Directory to store chunks in.
# CLI flag: -local.chunk-directory
[directory: <string> | default = ""]

[aws: <map of string to aws_storage_config>]

[azure: <map of string to azure_storage_config>]

[bos: <map of string to bos_storage_config>]

[filesystem: <map of string to local_storage_config>]

[gcs: <map of string to gcs_storage_config>]

[alibabacloud: <map of string to alibabacloud_storage_config>]

[swift: <map of string to swift_storage_config>]

# Configuration file to periodically check and reload.
[file: <string>: default = empty]

# How often to check the file.
[period: <duration>: default 10s]

overrides:
  tenant1:
    ingestion_rate_mb: 10
    max_streams_per_user: 100000
    max_chunks_per_query: 100000
  tenant2:
    max_streams_per_user: 1000000
    max_chunks_per_query: 1000000

multi_kv_config:
    mirror-enabled: false
    primary: consul