Menu
Documentationbreadcrumb arrow Grafana Lokibreadcrumb arrow Send databreadcrumb arrow Grafana Alloybreadcrumb arrow Sending Logs to Loki via Kafka using Alloy
Open source

Sending Logs to Loki via Kafka using Alloy

Alloy natively supports receiving logs via Kafka. In this example, we will configure Alloy to receive logs via Kafka using two different methods:

  • loki.source.kafka: reads messages from Kafka using a consumer group and forwards them to other loki.* components.
  • otelcol.receiver.kafka: accepts telemetry data from a Kafka broker and forwards it to other otelcol.* components.

Dependencies

Before you begin, ensure you have the following to run the demo:

  • Docker
  • Docker Compose

Tip

Alternatively, you can try out this example in our interactive learning environment: Sending Logs to Loki via Kafka using Alloy.

It’s a fully configured environment with all the dependencies already installed.

Interactive

Provide feedback, report bugs, and raise issues in the Grafana Killercoda repository.

Scenario

In this scenario, we have a microservices application called the Carnivorous Greenhouse. This application consists of the following services:

  • User Service: Manages user data and authentication for the application. Such as creating users and logging in.
  • Plant Service: Manages the creation of new plants and updates other services when a new plant is created.
  • Simulation Service: Generates sensor data for each plant.
  • Websocket Service: Manages the websocket connections for the application.
  • Bug Service: A service that when enabled, randomly causes services to fail and generate additional logs.
  • Main App: The main application that ties all the services together.
  • Database: A database that stores user and plant data.

Each service generates logs that are sent to Alloy via Kafka. In this example, they are sent on two different topics:

  • loki: This sends a structured log formatted message (json).
  • otlp: This sends a serialized OpenTelemetry log message.

You would not typically do this within your own application, but for the purposes of this example we wanted to show how Alloy can handle different types of log messages over Kafka.

Step 1: Environment setup

In this step, we will set up our environment by cloning the repository that contains our demo application and spinning up our observability stack using Docker Compose.

  1. To get started, clone the repository that contains our demo application:

    bash
    git clone -b microservice-kafka  https://github.com/grafana/loki-fundamentals.git
  2. Next we will spin up our observability stack using Docker Compose:

    bash
    docker compose -f loki-fundamentals/docker-compose.yml up -d

    This will spin up the following services:

    console
    ✔ Container loki-fundamentals-grafana-1      Started                                                        
    ✔ Container loki-fundamentals-loki-1         Started                        
    ✔ Container loki-fundamentals-alloy-1        Started
    ✔ Container loki-fundamentals-zookeeper-1    Started
    ✔ Container loki-fundamentals-kafka-1        Started

We will be access two UI interfaces:

Step 2: Configure Alloy to ingest raw Kafka logs

In this first step, we will configure Alloy to ingest raw Kafka logs. To do this, we will update the config.alloy file to include the Kafka logs configuration.

Open your Code Editor and Locate the config.alloy file

Grafana Alloy requires a configuration file to define the components and their relationships. The configuration file is written using Alloy configuration syntax. We will build the entire observability pipeline within this configuration file. To start, we will open the config.alloy file in the code editor:

  1. Open the loki-fundamentals directory in a code editor of your choice.
  2. Locate the config.alloy file in the top level directory, `loki-fundamentals'.
  3. Click on the config.alloy file to open it in the code editor.

You will copy all three of the following configuration snippets into the config.alloy file.

Source logs from kafka

First, we will configure the Loki Kafka source. loki.source.kafka reads messages from Kafka using a consumer group and forwards them to other loki.* components.

The component starts a new Kafka consumer group for the given arguments and fans out incoming entries to the list of receivers in forward_to.

Add the following configuration to the config.alloy file:

alloy
loki.source.kafka "raw" {
  brokers                = ["kafka:9092"]
  topics                 = ["loki"]
  forward_to             = [loki.write.http.receiver]
  relabel_rules          = loki.relabel.kafka.rules
  version                = "2.0.0"
  labels                = {service_name = "raw_kafka"}
}

In this configuration:

  • brokers: The Kafka brokers to connect to.
  • topics: The Kafka topics to consume. In this case, we are consuming the loki topic.
  • forward_to: The list of receivers to forward the logs to. In this case, we are forwarding the logs to the loki.write.http.receiver.
  • relabel_rules: The relabel rules to apply to the incoming logs. This can be used to generate labels from the temporary internal labels that are added by the Kafka source.
  • version: The Kafka protocol version to use.
  • labels: The labels to add to the incoming logs. In this case, we are adding a service_name label with the value raw_kafka. This will be used to identify the logs from the raw Kafka source in the Log Explorer App in Grafana.

For more information on the loki.source.kafka configuration, see the Loki Kafka Source documentation.

Create a dynamic relabel based on Kafka topic

Next, we will configure the Loki relabel rules. The loki.relabel component rewrites the label set of each log entry passed to its receiver by applying one or more relabeling rules and forwards the results to the list of receivers in the component’s arguments. In our case we are directly calling the rule from the loki.source.kafka component.

Now add the following configuration to the config.alloy file:

alloy
loki.relabel "kafka" {
  forward_to      = [loki.write.http.receiver]
  rule {
    source_labels = ["__meta_kafka_topic"]
    target_label  = "topic"
  }
}

In this configuration:

  • forward_to: The list of receivers to forward the logs to. In this case, we are forwarding the logs to the loki.write.http.receiver. Though in this case, we are directly calling the rule from the loki.source.kafka component. So forward_to is being used as a placeholder as it is required by the loki.relabel component.
  • rule: The relabeling rule to apply to the incoming logs. In this case, we are renaming the __meta_kafka_topic label to topic.

For more information on the loki.relabel configuration, see the Loki Relabel documentation.

Write logs to Loki

Lastly, we will configure the Loki write component. loki.write receives log entries from other loki components and sends them over the network using the Loki logproto format.

And finally, add the following configuration to the config.alloy file:

alloy
loki.write "http" {
  endpoint {
    url = "http://loki:3100/loki/api/v1/push"
  }
}

In this configuration:

  • endpoint: The endpoint to send the logs to. In this case, we are sending the logs to the Loki HTTP endpoint.

For more information on the loki.write configuration, see the Loki Write documentation.

Reload the Alloy configuration to check the changes

Once added, save the file. Then run the following command to request Alloy to reload the configuration:

bash
curl -X POST http://localhost:12345/-/reload

The new configuration will be loaded. You can verify this by checking the Alloy UI: http://localhost:12345.

Stuck? Need help?

If you get stuck or need help creating the configuration, you can copy and replace the entire config.alloy using the completed configuration file:

bash
cp loki-fundamentals/completed/config-raw.alloy loki-fundamentals/config.alloy
curl -X POST http://localhost:12345/-/reload

Step 3: Configure Alloy to ingest OpenTelemetry logs via Kafka

Next we will configure Alloy to also ingest OpenTelemetry logs via Kafka, we need to update the Alloy configuration file once again. We will add the new components to the config.alloy file along with the existing components.

Open your Code Editor and Locate the config.alloy file

Like before, we generate our next pipeline configuration within the same config.alloy file. You will add the following configuration snippets to the file in addition to the existing configuration. Essentially, we are configuring two pipelines within the same Alloy configuration file.

Source OpenTelemetry logs from Kafka

First, we will configure the OpenTelemetry Kafaka receiver. otelcol.receiver.kafka accepts telemetry data from a Kafka broker and forwards it to other otelcol.* components.

Now add the following configuration to the config.alloy file:

alloy
otelcol.receiver.kafka "default" {
  brokers          = ["kafka:9092"]
  protocol_version = "2.0.0"
  topic           = "otlp"
  encoding        = "otlp_proto"

  output {
    logs    = [otelcol.processor.batch.default.input]
  }
}

In this configuration:

  • brokers: The Kafka brokers to connect to.
  • protocol_version: The Kafka protocol version to use.
  • topic: The Kafka topic to consume. In this case, we are consuming the otlp topic.
  • encoding: The encoding of the incoming logs. Which decodes messages as OTLP protobuf.
  • output: The list of receivers to forward the logs to. In this case, we are forwarding the logs to the otelcol.processor.batch.default.input.

For more information on the otelcol.receiver.kafka configuration, see the OpenTelemetry Receiver Kafka documentation.

Batch OpenTelemetry logs before sending

Next, we will configure a OpenTelemetry processor. otelcol.processor.batch accepts telemetry data from other otelcol components and places them into batches. Batching improves the compression of data and reduces the number of outgoing network requests required to transmit data. This processor supports both size and time based batching.

Now add the following configuration to the config.alloy file:

alloy
otelcol.processor.batch "default" {
    output {
        logs = [otelcol.exporter.otlphttp.default.input]
    }
}

In this configuration:

  • output: The list of receivers to forward the logs to. In this case, we are forwarding the logs to the otelcol.exporter.otlphttp.default.input.

For more information on the otelcol.processor.batch configuration, see the OpenTelemetry Processor Batch documentation.

Write OpenTelemetry logs to Loki

Lastly, we will configure the OpenTelemetry exporter. otelcol.exporter.otlphttp accepts telemetry data from other otelcol components and writes them over the network using the OTLP HTTP protocol. We will use this exporter to send the logs to the Loki native OTLP endpoint.

Finally, add the following configuration to the config.alloy file:

alloy
otelcol.exporter.otlphttp "default" {
  client {
    endpoint = "http://loki:3100/otlp"
  }
}

In this configuration:

  • client: The client configuration for the exporter. In this case, we are sending the logs to the Loki OTLP endpoint.

For more information on the otelcol.exporter.otlphttp configuration, see the OpenTelemetry Exporter OTLP HTTP documentation.

Reload the Alloy configuration to check the changes

Once added, save the file. Then run the following command to request Alloy to reload the configuration:

bash
curl -X POST http://localhost:12345/-/reload

The new configuration will be loaded. You can verify this by checking the Alloy UI: http://localhost:12345.

Stuck? Need help (Full Configuration)?

If you get stuck or need help creating the configuration, you can copy and replace the entire config.alloy. This differs from the previous Stuck? Need help section as we are replacing the entire configuration file with the completed configuration file. Rather than just adding the first Loki Raw Pipeline configuration.

bash
cp loki-fundamentals/completed/config.alloy loki-fundamentals/config.alloy
curl -X POST http://localhost:12345/-/reload

Step 3: Start the Carnivorous Greenhouse

In this step, we will start the Carnivorous Greenhouse application. To start the application, run the following command:

Note

This docker-compose file relies on the loki-fundamentals_loki docker network. If you have not started the observability stack, you will need to start it first.
bash
docker compose -f loki-fundamentals/greenhouse/docker-compose-micro.yml up -d --build 

This will start the following services:

console
 ✔ Container greenhouse-db-1                 Started                                                         
 ✔ Container greenhouse-websocket_service-1  Started 
 ✔ Container greenhouse-bug_service-1        Started
 ✔ Container greenhouse-user_service-1       Started
 ✔ Container greenhouse-plant_service-1      Started
 ✔ Container greenhouse-simulation_service-1 Started
 ✔ Container greenhouse-main_app-1           Started

Once started, you can access the Carnivorous Greenhouse application at http://localhost:5005. Generate some logs by interacting with the application in the following ways:

  • Create a user
  • Log in
  • Create a few plants to monitor
  • Enable bug mode to activate the bug service. This will cause services to fail and generate additional logs.

Finally to view the logs in Loki, navigate to the Loki Logs Explore view in Grafana at http://localhost:3000/a/grafana-lokiexplore-app/explore.

Summary

In this example, we configured Alloy to ingest logs via Kafka. We configured Alloy to ingest logs in two different formats: raw logs and OpenTelemetry logs. Where to go next?

Further reading

For more information on Grafana Alloy, refer to the following resources:

Complete metrics, logs, traces, and profiling example

If you would like to use a demo that includes Mimir, Loki, Tempo, and Grafana, you can use Introduction to Metrics, Logs, Traces, and Profiling in Grafana. Intro-to-mltp provides a self-contained environment for learning about Mimir, Loki, Tempo, and Grafana.

The project includes detailed explanations of each component and annotated configurations for a single-instance deployment. Data from intro-to-mltp can also be pushed to Grafana Cloud.