Menu

This is documentation for the next version of Tempo distributed. For the latest stable release, go to the latest version.

Enterprise Open source RSS

Get started with Grafana Tempo using the Helm chart

The Grafana Tempo Helm chart allows you to configure, install, and upgrade Grafana Tempo within a Kubernetes cluster. Using this procedure, you will:

  • Create a custom namespace within your Kubernetes cluster
  • Install Helm and the Grafana helm-charts repository
  • Configure a storage option for traces
  • Install Tempo using Helm

To learn more about Helm, read the Helm documentation.

If you are using Helm to install Grafana Enterprise Traces (GET), then you also need to:

  • Install the GET license
  • Create an additional storage bucket for the admin resources
  • Disable the gateway
  • Enable the enterpriseGateway

Before you begin

These instructions are common across any flavor of Kubernetes. They also assume that you know how to install, configure, and operate a Kubernetes cluster. It also assumes that you have an understanding of what the kubectl command does.

Warning

This procedure is primarily aimed at local or development setups.

Hardware requirements

  • A single Kubernetes node with a minimum of 4 cores and 16 GB RAM

Software requirements

Additional requirements

Verify that you have:

  • Access to the Kubernetes cluster
  • Enabled persistent storage in the Kubernetes cluster, which has a default storage class setup.
  • Access to a local storage option (like MinIO) or a storage bucket like Amazon S3, Azure Blob Storage, or Google Cloud Platform (refer to Optional: Other storage options section for more information)
  • DNS service works in the Kubernetes cluster (refer to Debugging DNS resolution in the Kubernetes documentation)
  • Optional: Set up an ingress controller in the Kubernetes cluster, for example ingress-nginx

Note

If you want to access Tempo from outside of the Kubernetes cluster, you may need an ingress. Ingress-related procedures are optional.

Create a custom namespace and add the Helm repository

Using a custom namespace solves problems later on because you don’t have to overwrite the default namespace.

  1. Create a unique Kubernetes namespace, for example tempo-test:

    bash
    kubectl create namespace tempo-test

For more details, see the Kubernetes documentation about Creating a namespace.

  1. Set up a Helm repository using the following commands:

    bash
    helm repo add grafana https://grafana.github.io/helm-charts
    helm repo update

    Note

    The Helm chart at https://grafana.github.io/helm-charts is a publication of the source code at grafana/tempo.

Set Helm chart values

The Helm Chart for Tempo includes a file called “values.yaml”, containing default configuration options. In this case, you create a local file called custom.yaml in a working directory.

After creating the file, you have the option to make changes in that file as needed for your deployment environment.

When you use Helm to deploy the chart, you can specify that Helm uses your custom.yaml instead of values.yaml. The custom.yaml file sets the storage and traces options, enables the gateway, and sets the cluster to main. The traces configure the distributor’s receiver protocols.

To customize your Helm chart values:

  1. Create a custom.yaml file in your working directory.
  2. From the examples below, copy and paste either the Tempo Helm chart values or the Grafana Enterprise Traces (GET) Helm chart values into your file.
  3. Save your custom.yaml file.
  4. For simple deployments, use the default storage and minio sections. The Helm chart deploys MinIO. Tempo uses it to store traces and other information, if you are running GET. Further down this page are instructions for customizing your trace storage configuration options.
  5. Set your traces values to configure the receivers on the Tempo distributor.
  6. Save the changes to your file.

Tempo Helm chart values

This sample file contains example values for installing Tempo using Helm.

yaml
---
storage:
  trace:
    backend: s3
    s3:
      access_key: 'grafana-tempo'
      secret_key: 'supersecret'
      bucket: 'tempo-traces'
      endpoint: 'tempo-minio:9000'
      insecure: true
#MinIO storage configuration
minio:
  enabled: true
  mode: standalone
  rootUser: grafana-tempo
  rootPassword: supersecret
  buckets:
    # Default Tempo storage bucket
    - name: tempo-traces
      policy: none
      purge: false
traces:
  otlp:
    grpc:
      enabled: true
    http:
      enabled: true
  zipkin:
    enabled: false
  jaeger:
    thriftHttp:
      enabled: false
  opencensus:
    enabled: false

Grafana Enterprise Traces helm chart values

The values in the example below provide configuration values for GET. These values include an additional admin bucket, disables the gateway, enables the enterpriseGateway, and specifies a license.

yaml
---
global:
  clusterDomain: 'cluster.local'

multitenancyEnabled: true
enterprise:
  enabled: true
  image:
    tag: v2.4.1
enterpriseGateway:
  enabled: true
gateway:
  enabled: false
# MinIO storage configuration
minio:
  enabled: true
  mode: standalone
  rootUser: grafana-tempo
  rootPassword: supersecret
  buckets:
    # Bucket for traces storage if enterprise.enabled is true - requires license.
    - name: enterprise-traces
      policy: none
      purge: false
    # Admin client bucket if enterprise.enabled is true - requires license.
    - name: enterprise-traces-admin
      policy: none
      purge: false
  # Changed the mc config path to '/tmp' from '/etc' as '/etc' is only writable by root and OpenShift will not permit this.
  configPathmc: '/tmp/minio/mc/'
storage:
  trace:
    backend: s3
    s3:
      access_key: 'grafana-tempo'
      secret_key: 'supersecret'
      bucket: 'enterprise-traces'
      endpoint: 'tempo-minio:9000'
      insecure: true
  admin:
    backend: s3
    s3:
      access_key_id: 'grafana-tempo'
      secret_access_key: 'supersecret'
      bucket_name: 'enterprise-traces-admin'
      endpoint: 'tempo-minio:9000'
      insecure: true
traces:
  otlp:
    http:
      enabled: true
    grpc:
      enabled: true
distributor:
  config:
    log_received_spans:
      enabled: true

license:
  contents: |
    LICENSEGOESHERE

Enterprise license configuration

If you are using GET, you need to configure a license, by adding the license to the custom.yaml file or by using a secret that contains the license. Only use one of these options.

Note

The Set up GET instructions explain how to obtain a license.

Using the first option, you can specify the license text in the custom.yaml values file created in the license: section.

yaml
license:
  contents: |
    LICENSEGOESHERE

If you don’t need to specify the license in the custom.yaml file, you can reference a secret that contains the license content.

  1. Create the secret.

    bash
    kubectl -n tempo-test create secret generic tempo-license --from-file=license.jwt
  2. Configure the custom.yaml that you created to reference the secret.

    yaml
    license:
      external: true

Set your storage option

Before you run the Helm chart, you need to configure where to store trace data.

The storage block defined in the values.yaml file configures the storage that Tempo uses for trace storage.

The procedure below configures MinIO as the local storage option managed by the Helm chart. However, you can use a other storage provides. Refer to the Optional storage section below.

Note

The MinIO installation included with this Helm chart is for demonstration purposes only. This configuration sets up a maximum storage size of 5GiB. This MinIO installation isn’t suitable for production environments and should only be used for example purposes. For production, use performant, Enterprise-grade object storage.

The Helm chart values provided include the basic MinIO set up values. If you need to customize them, the steps below walk you through which sections to update. If you don’t need to change the values, you can skip this section.

  1. Optional: Update the configuration options in custom.yaml for your configuration.

    yaml
    ---
    storage:
      trace:
        backend: s3
        s3:
          access_key: 'grafana-tempo'
          secret_key: 'supersecret'
          bucket: 'tempo-traces'
          endpoint: 'tempo-minio:9000'
          insecure: true

    Enterprise users may also need to specify an additional bucket for admin resources.

    yaml
    storage:
      admin:
        backend: s3
        s3:
          access_key_id: 'grafana-tempo'
          secret_access_key: 'supersecret'
          bucket_name: 'enterprise-traces-admin'
          endpoint: 'tempo-minio:9000'
          insecure: true
  2. Optional: Locate the MinIO section and change the username and password.

    yaml
    minio:
      enabled: true
      mode: standalone
      rootUser: minio
      rootPassword: minio123

Optional: Other storage options

Persistent storage is enabled in the Kubernetes cluster, which has a default storage class setup. You can change the default StorageClass using Kubernetes documentation.

This Helm chart guide defaults to using MinIO as a simple solution to get you started. However, you can use a storage bucket like Amazon S3, Azure Blob Storage, or Google Cloud Platform.

Each storage provider has a different configuration stanza. You need to update your configuration based upon you storage provider. Refer to the storage configuration block for information on storage options.

To use other storage options, set minio.enabled: false in the values.yaml file:

yaml
---
minio:
  enabled: false # Disables the MinIO chart

Update the storage configuration options based upon your requirements:

Set traces receivers

The Helm chart values in your custom.yaml file are configure to use OTLP. If you are using other receivers, then you need to configure them.

You can configure Tempo can to receive data from OTLP, Jaeger, Zipkin, Kafka, and OpenCensus. The following example enables OTLP on the distributor. For other options, refer to the distributor documentation

The example used in this procedure has OTLP enabled.

Enable any other protocols based on your requirements.

yaml
traces:
  otlp:
    grpc:
      enabled: true
    http:
      enabled: true
  zipkin:
    enabled: false
  jaeger:
    thriftHttp:
      enabled: false
  opencensus:
    enabled: false

Optional: Add custom configurations

There are many configuration options available in the tempo-distributed Helm chart. This procedure only covers the bare minimum required to launch GET or Tempo in a basic deployment.

You can add values to your custom.yaml file to set custom configuration options that override the defaults present in the Helm chart. The tempo-distributed Helm chart’s README contains a list of available options. The values.yaml files provides the defaults for the Helm chart.

Use the following command to see all of the configurable parameters for the tempo-distributed Helm chart:

bash
helm show values grafana/tempo-distributed

Add the configuration sections to the custom.yaml file. Include this file when you install or upgrade the Helm chart.

Optional: Configure an ingress

An ingress lets you externally access a Kubernetes cluster. Replace <ingress-host> with a suitable hostname that DNS can resolve to the external IP address of the Kubernetes cluster. For more information, refer to Ingress.

Note

On Linux systems, and if it’s not possible for you set up local DNS resolution, you can use the --add-host=<ingress-host>:<kubernetes-cluster-external-address> command-line flag to define the <ingress-host> local address for the docker commands in the examples that follow.
  1. Open your custom.yaml or create a YAML file of Helm values called custom.yaml.

  2. Add the following configuration to the file:

    yaml
    nginx:
      ingress:
        enabled: true
        ingressClassName: nginx
        hosts:
          - host: <ingress-host>
            paths:
              - path: /
                pathType: Prefix
        tls: {} # empty, disabled.
  3. Save the changes.

Install Grafana Tempo using the Helm chart

Use the following command to install Tempo using the configuration options you’ve specified in the custom.yaml file:

bash
helm -n tempo-test install tempo grafana/tempo-distributed -f custom.yaml

Note

The output of the command contains the write and read URLs necessary for the following steps.

If the installation is successful, the output should be similar to this:

bash
>  helm -n tempo-test install tempo grafana/tempo-distributed -f custom.yaml

W0210 15:02:09.901064    8613 warnings.go:70] spec.template.spec.topologySpreadConstraints[0].topologyKey: failure-domain.beta.kubernetes.io/zone is deprecated since v1.17; use "topology.kubernetes.io/zone" instead
W0210 15:02:09.904082    8613 warnings.go:70] spec.template.spec.topologySpreadConstraints[0].topologyKey: failure-domain.beta.kubernetes.io/zone is deprecated since v1.17; use "topology.kubernetes.io/zone" instead
W0210 15:02:09.906932    8613 warnings.go:70] spec.template.spec.topologySpreadConstraints[0].topologyKey: failure-domain.beta.kubernetes.io/zone is deprecated since v1.17; use "topology.kubernetes.io/zone" instead
W0210 15:02:09.929946    8613 warnings.go:70] spec.template.spec.topologySpreadConstraints[0].topologyKey: failure-domain.beta.kubernetes.io/zone is deprecated since v1.17; use "topology.kubernetes.io/zone" instead
W0210 15:02:09.930379    8613 warnings.go:70] spec.template.spec.topologySpreadConstraints[0].topologyKey: failure-domain.beta.kubernetes.io/zone is deprecated since v1.17; use "topology.kubernetes.io/zone" instead
NAME: tempo
LAST DEPLOYED: Fri May 31 15:02:08 2023
NAMESPACE: tempo-test
STATUS: deployed
REVISION: 1
TEST SUITE: None
NOTES:
***********************************************************************
 Welcome to Grafana Tempo
 Chart version: 1.10.1
 Tempo version: 2.5.0
***********************************************************************

Installed components:
* ingester
* distributor
* querier
* query-frontend
* compactor
* memcached

Note

If you update your values.yaml or custom.yaml, run the same helm install command and replace install with upgrade.

Check the statuses of the Tempo pods:

bash
kubectl -n tempo-test get pods

The results look similar to this:

bash
NAME                                    READY   STATUS    RESTARTS   AGE
tempo-compactor-86cd974cf-8qrk2         1/1     Running   0          22h
tempo-distributor-bbf4889db-v8l8r       1/1     Running   0          22h
tempo-ingester-0                        1/1     Running   0          22h
tempo-ingester-1                        1/1     Running   0          22h
tempo-ingester-2                        1/1     Running   0          22h
tempo-memcached-0                       1/1     Running   0          8d
tempo-minio-6c4b66cb77-sgm8z            1/1     Running   0          26h
tempo-querier-777c8dcf54-fqz45          1/1     Running   0          22h
tempo-query-frontend-7f7f686d55-xsnq5   1/1     Running   0          22h

Wait until all of the pods have a status of Running or Completed, which might take a few minutes.

For Enterprise users, the output results look similar to this:

bash
❯ k get pods
NAME                                        READY   STATUS      RESTARTS      AGE
tempo-admin-api-7c59c75f6c-wvj75            1/1     Running     0             86m
tempo-compactor-75777b5d8c-5f44z            1/1     Running     0             86m
tempo-distributor-94fd965f4-prkz6           1/1     Running     0             86m
tempo-enterprise-gateway-6d7f78cf97-dhz9b   1/1     Running     0             86m
tempo-ingester-0                            1/1     Running     0             86m
tempo-ingester-1                            1/1     Running     1 (86m ago)   86m
tempo-ingester-2                            1/1     Running     1 (86m ago)   86m
tempo-memcached-0                           1/1     Running     0             86m
tempo-minio-6c4b66cb77-wjfpf                1/1     Running     0             86m
tempo-querier-6cb474546-cwlkz               1/1     Running     0             86m
tempo-query-frontend-6d6566cbf7-pcwg6       1/1     Running     0             86m
tempo-tokengen-job-58jhs                    0/1     Completed   0             86m

Note that the tempo-tokengen-job has emitted a log message containing the initial admin token.

Retrieve the token with this command:

bash
kubectl get pods | awk '/.*-tokengen-job-.*/ {print $1}' | xargs -I {} kubectl logs {} | awk '/Token:\s+/ {print $2}'

To get the logs for the tokengen Pod, you can use:

bash
kubectl logs tempo-tokengen-job-58jhs

Test your installation

The next step is to test your Tempo installation by sending trace data to Grafana. You can use the Set up a test application for a Tempo cluster document for step-by-step instructions.

If you already have Grafana available, you can add a Tempo data source using the URL fitting to your environment. For example: http://tempo-query-frontend.trace-test.svc.cluster.local:3100

Enterprise users may need to install the Enterprise Traces plugin in their Grafana Enterprise instance to allow configuration of tenants, tokens, and access policies. After creating a user and access policy using the plugin, you can configure a data source to point at http://tempo-enterprise-gateway.tempo-test.svc.cluster.local:3100.