Documentation Beyla Configure Export modes

Beyla export modes

Beyla can export data in two modes:

• Alloy mode (recommended mode): the auto-instrumentation tool sends metrics and traces to the Grafana Alloy, which processes and sends them to Mimir and Tempo. In this scenario, Alloy takes care of the authentication required by the Grafana Mimir/Tempo endpoints. This mode also integrates better with some Grafana exclusive features, such as the span-to-metrics and span-to-service graph converters.
• Direct mode: the auto-instrumentation tool can push metrics and/or traces directly to a remote endpoint (using the OpenTelemetry/OTEL protocols) or expose a Prometheus HTTP endpoint ready to be scraped (i.e. pull mode). In the direct OTEL push mode, the auto-instrumentation tool needs to be configured with the authentication credentials.

Running in Direct mode

The OTLP endpoint authentication credentials are provided by using the following environment variables:

• OTEL_EXPORTER_OTLP_ENDPOINT
• OTEL_EXPORTER_OTLP_HEADERS

To run in Direct mode by using the Prometheus scrape endpoint, please refer to the configuration documentation.

Running in Alloy mode

ℹ️ This tutorial assumes that both Alloy and the auto-instrumentation tool are installed as local Linux OS executables. For further examples on downloading and running the auto-instrumentation tool as an OCI container, you can check the documentation sections on running the Beyla as a Docker container or running Beyla in Kubernetes.

First, locally install and configure Grafana Alloy, according to the latest documentation. Alloy facilitates the ingestion of OpenTelemetry metrics and traces from the auto-instrumentation tool, and process and forward to the different Grafana product endpoints (Mimir and/or Tempo).

Configuring Alloy pipeline

Configure the Alloy pipeline and specify the following nodes:

Download the example River configuration file used in this article.

Alloy needs to expose an OpenTelemetry receiver endpoint, such that the auto-instrumentation tool can forward both metrics and traces. The Alloy configuration file needs to include the following entry:

alloy Copy

otelcol.receiver.otlp "default" {
  grpc {}
  http {}

  output {
    metrics = [otelcol.processor.batch.default.input]
    traces = [otelcol.processor.batch.default.input]
  }
}

This enables reception of OpenTelemetry events via GRPC and HTTP, which will be forwarded to the next stage in the pipeline, the Batch processor, which will then accumulate the messages and forward them to the exporters:

alloy Copy

otelcol.processor.batch "default" {
  output {
    metrics = [otelcol.exporter.prometheus.default.input]
    traces  = [otelcol.exporter.otlp.tempo.input]
  }
}

You can export either metrics, traces, or both. If you only want to export a single type of data, you can just avoid the metrics or traces lines in the previous node definitions, and ignore some of the following exporters.

The metrics are exported in Prometheus format to Grafana Mimir. The configuration entry will need to specify an endpoint with basic authentication. In the provided example, the endpoint and the credentials are provided via environment variables:

alloy Copy

otelcol.exporter.prometheus "default" {
    forward_to = [prometheus.remote_write.mimir.receiver]
}

prometheus.remote_write "mimir" {
  endpoint {
    url = "https://" + env("MIMIR_ENDPOINT") + "/api/prom/push"
    basic_auth {
      username = env("MIMIR_USER")
      password = env("GRAFANA_API_KEY")
    }
  }
}

Run Alloy with the following environment variables set:

sh Copy

export MIMIR_USER=734432
export MIMIR_ENDPOINT=prometheus-prod-01-eu-west-0.grafana.net
export GRAFANA_API_KEY=VHJhbGFyw60gcXVlIHRlIHbD....=

Finally, to export the traces, you will need to set up a Grafana Tempo exporter and an endpoint, also configured via environment variables:

alloy Copy

otelcol.exporter.otlp "tempo" {
    client {
        endpoint = env("TEMPO_ENDPOINT")
        auth     = otelcol.auth.basic.creds.handler
    }
}

otelcol.auth.basic "creds" {
    username = env("TEMPO_USER")
    password = env("GRAFANA_API_KEY")
}

Please note that the TEMPO_ENDPOINT and TEMPO_USER values are different from MIMIR_ENDPOINT and MIMIR_USER.

To run Alloy with the previous configuration (for example, written in a file named alloy-config.river):

Copy

grafana-alloy run alloy-config.river

Configuring and running the auto-instrumentation tool

Configure the auto-instrumentation tool to forward data to Grafana Alloy. This tutorial assumes Beyla and Alloy are running on the same host, so there is no need to secure the traffic nor provide authentication in the Alloy OTLP receiver.

You can configure the auto-instrumentation tool both via environment variables or via a configuration YAML file, which is what we will use in this example. Please refer to the complete Configuration documentation for more detailed description of each configuration option.

You can download the whole example configuration file, which we will explain in the rest of this section.

First, you will need to specify the executable to instrument. If, for example, the service executable is a process that opens the port 443, you can use the open_port property of the YAML document:

yaml Copy

open_port: 443

The auto-instrumentation tool will automatically search and instrument the process listening on port 443.

Next, specify where the traces and the metrics are submitted. If Alloy is running on the local host, it uses port 4318:

yaml Copy

otel_metrics_export:
  endpoint: http://localhost:4318
otel_traces_export:
  endpoint: http://localhost:4318

You can specify both otel_metrics_export and otel_traces_export properties to allow exporting both metrics and traces, or only one of them to export either metrics or traces.

To run the auto-instrumentation tool (previously downloaded from the Beyla releases page), you will need to specify the path to the configuration YAML file, either with the -config command-line argument or the BEYLA_CONFIG_PATH environment variable. For example instrument-config.yml:

Copy

beyla -config instrument-config.yml

or

Copy

BEYLA_CONFIG_PATH=instrument-config.yml beyla